User Manual
Table Of Contents
- Preface
- Legal Notice
- Safety Precautions
- Precautions
- Legal Information
- Table of Contents
- 1. Before Using the Printer
- 2. Paper and Print Media
- 3. Driver installation and uninstallation
- 4. Wired network setup (applicable to wirednetwork models)
- 5. Wireless network setup (applicable to Wi-Fi models)
- 6. Web server
- 7. Print
- 8. Copying
- 9. Scan
- 10. Fax
- 11. Mobile Print/Scan/Fax
- 12. General Settings
- 13. Routine Maintenance
- 14. Troubleshooting
- 15. Menu Structure
- 16. Product Specifications
12.1.6.Auto shut-off setting
1) Press "Menu" to enter the Menu Settings interface.
2) Press "OK" to select the "System Setting" option.
3)
Press direction key “▲” or “▼” to select options of “Auto off set”, press “OK” to set of
condition and off delay.
Note: Set auto off condition:
• Shutdown under no-port state (default configuration): no port is connected,
Wi-Fi function deactivated,printer is under standby or sleep mode.
• Shutdown under idle state: the printer is under standby or sleep mode.
• If auto off condition is satisfied, printer will be off at the preset time.
• After printer is off, power consumption is 0.5W or lower.
• Individual countries (or regions) do not support auto off setting.
“Auto shut-off setting” to set off condition and off delay of printer.
115