User Manual

ManualsBrandsPantum ManualsOffice ElectronicsLaser Printer Scanner Copier All in One Machine, Wireless Black White Laser Printer for Home Office, Print at 35PPM, M7102DW(V4T56A)

151

152

153

154

155

156

157

158

159

160

Table Of Contents

Preface
Legal Notice
Safety Precautions
Precautions
Legal Information
Table of Contents
1. Before Using the Printer
- 1.1.Product series introduction
- 1.2.Supplied Accessories
- 1.3.Product View
- 1.4.Laser Toner Cartridge
- 1.5.Control Panel
  - 1.5.1.Overview of control panel
  - 1.5.2. Function of numeric keyboard
- 1.6. Function of status indicator
- 1.7. Function of power indicator
2. Paper and Print Media
- 2.1.Paper Specification
- 2.2.Special Paper
- 2.3.Non-printing Area and Non-scanning Area
- 2.4.Loading Paper
  - 2.4.1.Loading into the Automatic Feeder Tray
  - 2.4.2.Install manual feed tray
- 2.5. Paper and Manuscript Use Process
  - 2.5.1.Scanning With Tablet
  - 2.5.2. Scan with the automatic document feeder (ADF)
3. Driver installation and uninstallation
- 3.1. How to install Windows printer driver
- 3.2. Mac system driver installation
  - 3.2.1.Driver installation
- 3.3.Add printer to Mac system
4. Wired network setup (applicable to wirednetwork models)
- 4.1.Set IP Address
  - 4.1.1.Automatic Setting
  - 4.1.2.Manual Setting
5. Wireless network setup (applicable to Wi-Fi models)
- 5.1.Basic structure mode
- 5.2.Wi-Fi Direct mode
- 5.3.Wireless network setup FAQs
6. Web server
- 6.1.Visit the embedded Web server
- 6.2.Use Web server to manage printer
7. Print
- 7.1.Print Function
- 7.2.Print Settings
- 7.3.Cancel printing
- 7.4.Printing Mode
  - 7.4.1.Printing with the Automatic Feeder Tray
  - 7.4.2.Printing with manual feed tray
- 7.5.Automatic Two-Sided Printing
  - 7.5.1.Duplex printing unit setup
  - 7.5.2.How to carry out auto duplex printing
- 7.6.Fine mode printing
- 7.7.Mute printing
- 7.8.Auto shut-off setting
- 7.9.Open Help Document
8. Copying
- 8.1. Copying function
- 8.2. Copying method
- 8.3. Copying cancel
- 8.4. Common copying setting
- 8.5. ID card copying setting
- 8.6. Receipt setting
  - 8.6.1.Intensity
  - 8.6.2.Paper setting
9. Scan
- 9.1.Pull Scan
- 9.2.Mac System Scan
  - 9.2.1.ICA Scan
  - 9.2.2. TWAIN Scan
- 9.3. Push Scan
- 9.4. Cancel Scan Job
10. Fax
- 10.1. Connect Devices
- 10.2. Fax Settings
- 10.3. Fax Functions
- 10.4.PC-Fax
  - 10.4.1.Sending Fax with PC-Fax
11. Mobile Print/Scan/Fax
- 11.1."Pantum" APP
- 11.2.Mopria mobile print
- 11.3.NFC function
  - 11.3.1.Preliminary preparations
  - 11.3.2.How to use NFC function to print
- 11.4.AirPrint mobile print
12. General Settings
- 12.1.System Settings
- 12.2. Network Settings
- 12.3. Network Information
- 12.4. Print information report
- 12.5. Residual amount of toner
- 12.6. Configure the e-mail address book
- 12.7. Configure the FTP address book
- 12.8. Online upgrade
13. Routine Maintenance
- 13.1.Cleaning the Printer
- 13.2.Toner cartridge and drum component maintenance
  - 13.2.1.About toner cartridge and drum component component
  - 13.2.2.Replace toner cartridge and drum component
14. Troubleshooting
- 14.1.Cleaning Jammed Paper
- 14.2.Software Failure
- 14.3. Error Message
- 14.4. Common Troubleshooting
  - 14.4.1.Common Trouble
  - 14.4.2. Image Defects
- 14.5. Fax faults
15. Menu Structure
16. Product Specifications
- 16.1.Overview of the Specifications
- 16.2.Print Specifications
- 16.3.Copy Specifications
- 16.4.Scan Specifications
- 16.5.Fax specification (applicable to machine with a fax)

Problems with

Paper

Handling

Paper feed failure

•

The printer paper isn't put

properly.

•

The print media is beyond

the usage specification

range.

•

The pickup roller is dirty.

Too

many papers in paper

tray.

Please install printing

medium correctly; please

print with manual feed

tray if special printing

medium is used to print.

•

Please use the print

media within the

specification range.

•

Please clean the

pickup roller.

Take the excessive

papers out from paper

tray; please print with

manual feed tray if

special printing medium

is used to print.

Paper Jam

Too many papers in paper

tray.

•

The print media is

beyond the usage

specification range.

•

There is foreign matter in

the feed channel.

• The pickup roller is dirty.

• Internal parts failure.

Take the excessive

papers out from paper

tray; please print with

manual feed tray if

special printing medium

is used to print.

Take the excessive

papers out from paper

tray; please print with

manual feed tray if

special printing medium is

used to print.

•

Clean the paper path.

•

Please clean the pickup

roller.

Print multipage

feed

•

Excessive static

electricity on the print

media.

•

The print media is damp

or sticks together.

•

Internal parts failure.

• Re-separate the print

media to eliminate some

static electricity. It is

suggested that you use

the recommended print

media.

Separate the print media

or use better quality and

dry print media.

Note: • If the trouble still can not be shooted after the above operations, please contact

Pantum Customer Service.

139