User Manual

ManualsBrandsPantum ManualsOffice ElectronicsLaser Printer Scanner Copier All in One Machine, Wireless Black White Laser Printer for Home Office, Print at 35PPM, M7102DW(V4T56A)

151

152

153

154

155

156

157

158

159

160

Table Of Contents

Preface
Legal Notice
Safety Precautions
Precautions
Legal Information
Table of Contents
1. Before Using the Printer
- 1.1.Product series introduction
- 1.2.Supplied Accessories
- 1.3.Product View
- 1.4.Laser Toner Cartridge
- 1.5.Control Panel
  - 1.5.1.Overview of control panel
  - 1.5.2. Function of numeric keyboard
- 1.6. Function of status indicator
- 1.7. Function of power indicator
2. Paper and Print Media
- 2.1.Paper Specification
- 2.2.Special Paper
- 2.3.Non-printing Area and Non-scanning Area
- 2.4.Loading Paper
  - 2.4.1.Loading into the Automatic Feeder Tray
  - 2.4.2.Install manual feed tray
- 2.5. Paper and Manuscript Use Process
  - 2.5.1.Scanning With Tablet
  - 2.5.2. Scan with the automatic document feeder (ADF)
3. Driver installation and uninstallation
- 3.1. How to install Windows printer driver
- 3.2. Mac system driver installation
  - 3.2.1.Driver installation
- 3.3.Add printer to Mac system
4. Wired network setup (applicable to wirednetwork models)
- 4.1.Set IP Address
  - 4.1.1.Automatic Setting
  - 4.1.2.Manual Setting
5. Wireless network setup (applicable to Wi-Fi models)
- 5.1.Basic structure mode
- 5.2.Wi-Fi Direct mode
- 5.3.Wireless network setup FAQs
6. Web server
- 6.1.Visit the embedded Web server
- 6.2.Use Web server to manage printer
7. Print
- 7.1.Print Function
- 7.2.Print Settings
- 7.3.Cancel printing
- 7.4.Printing Mode
  - 7.4.1.Printing with the Automatic Feeder Tray
  - 7.4.2.Printing with manual feed tray
- 7.5.Automatic Two-Sided Printing
  - 7.5.1.Duplex printing unit setup
  - 7.5.2.How to carry out auto duplex printing
- 7.6.Fine mode printing
- 7.7.Mute printing
- 7.8.Auto shut-off setting
- 7.9.Open Help Document
8. Copying
- 8.1. Copying function
- 8.2. Copying method
- 8.3. Copying cancel
- 8.4. Common copying setting
- 8.5. ID card copying setting
- 8.6. Receipt setting
  - 8.6.1.Intensity
  - 8.6.2.Paper setting
9. Scan
- 9.1.Pull Scan
- 9.2.Mac System Scan
  - 9.2.1.ICA Scan
  - 9.2.2. TWAIN Scan
- 9.3. Push Scan
- 9.4. Cancel Scan Job
10. Fax
- 10.1. Connect Devices
- 10.2. Fax Settings
- 10.3. Fax Functions
- 10.4.PC-Fax
  - 10.4.1.Sending Fax with PC-Fax
11. Mobile Print/Scan/Fax
- 11.1."Pantum" APP
- 11.2.Mopria mobile print
- 11.3.NFC function
  - 11.3.1.Preliminary preparations
  - 11.3.2.How to use NFC function to print
- 11.4.AirPrint mobile print
12. General Settings
- 12.1.System Settings
- 12.2. Network Settings
- 12.3. Network Information
- 12.4. Print information report
- 12.5. Residual amount of toner
- 12.6. Configure the e-mail address book
- 12.7. Configure the FTP address book
- 12.8. Online upgrade
13. Routine Maintenance
- 13.1.Cleaning the Printer
- 13.2.Toner cartridge and drum component maintenance
  - 13.2.1.About toner cartridge and drum component component
  - 13.2.2.Replace toner cartridge and drum component
14. Troubleshooting
- 14.1.Cleaning Jammed Paper
- 14.2.Software Failure
- 14.3. Error Message
- 14.4. Common Troubleshooting
  - 14.4.1.Common Trouble
  - 14.4.2. Image Defects
- 14.5. Fax faults
15. Menu Structure
16. Product Specifications
- 16.1.Overview of the Specifications
- 16.2.Print Specifications
- 16.3.Copy Specifications
- 16.4.Scan Specifications
- 16.5.Fax specification (applicable to machine with a fax)

14.4.2. Image Defects

Problem Cause Solution

The printout

is whitish or

light

• The print media does not meet the

usage specifications, for example the

media is damp or too rough.

• The resolution in the print program is

set too low, concentration setting is too

low, or toner saving mode is ticked.

•

Toner cartridge is damaged.

• Toner is low.

•

Please use proper print media

within the specification range.

•

Set the resolution and

concentration setting of program, or

cancel ticking the save toner mode.

• It is suggested to replace the

original toner cartridge.

Toner spots

•

Dirty toner cartridge or toner leakage.

•

Toner cartridge is damaged.

•

The print media that does not meet

usage specification is used. For example,

the media is damp or too rough.

•

The paper path is dirty.

• If toner spots appear when copying

and scanning, the platen glass may be

dirty.

•

The scanner is dirty or damaged.

•

It is suggested to replace the

original toner cartridge.

• Please use the print media within

the specification range.

•

Clean the paper path.

•

Clean the platen glass.

White spots

•

The print media that does not meet

usage specification is used. For example,

the media is damp or too rough.

•

The paper path is dirty.

• Inner damage of toner cartridge.

•

The reflective glass of the laser inside

the printer is dirty.

• Please use the print media within

the specification range.

• Clean the paper path.

• It is suggested to replace the

original toner cartridge.

•

Please clean the LSU lens.

Toner

comes off

•

The print media that does not meet

usage specification is used. For example,

the media is damp or too rough.

•

The printing paper medium set and

paper medium placed are not consistent.

•

The inside of the printer is dirty.

•

Toner cartridge is damaged.

•

The parts inside the printer are

damaged.

•

Please use printing medium within

the specification scope, and use

manual feed tray for printing in case

of special medium.

•

Please print with corresponding

paper medium.

•

Clean the inside of the printer.

•

It is suggested to replace the

original toner cartridge.

140