P1000/P2000 Series Laser Printer User Guide http://www.pantum.
Legal notices Trademark Pantum and Pantum logo are registered trademarks of Zhuhai Seine Technology Co., Ltd. Microsoft, Windows, Windows server and Windows Vista are either registered trademarks of Microsoft Corporation in the United States and other countries. The ownerships of software names related to this User Guide in accordance with corresponding license agreement belong to their respective owned companies.
Safety precautions Laser safety statement The device has a Class IIIB laser diode in the laser unit. You should not open the laser unit under any circumstances to avoid exposure to the laser beam. Since radiation emitted inside the device is completely confined within protective housings and external covers, the laser beam cannot escape during any phase of normal user operation.
There is high voltage electric current in the equipment. Before servicing the printer, please turn the printer off and unplug the power cord from the AC power supply wall outlet. Touching the power cord and AC power supply wall outlet with a wet hand can result in an electric shock. Parts of the printer will be hot after printer operation. Do not touch the fuser unit when opening the front or rear covers. The Caution label warns of areas that will get hot. Please do not remove or damage this label.
Regulatory Information This symbol indicates that, at the end of your product life, it must not be discarded as domestic waste. Instead, you should dispose of your used equipment to a designated collection point for the recycling of waste electrical and electronic equipement. Ref: EU Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). Please contact your distributor / supplier for further information. This product is suitable for indoor use only.
Table of Contents 1. Product information 1.1. 1.2. 1.3. 1.3.1. 1.3.2. 1.4. 1.4.1. 1.4.2. What’s in the box............................................................................................................ 1 Product features ............................................................................................................. 2 Overview......................................................................................................................... 3 Front view ......................
4. Installation and removal of the driver 4.1. 4.2. Driver installation ......................................................................................................... 33 Driver removal .............................................................................................................. 36 5.1. 5.2. Control panel instructions ............................................................................................ 37 The meaning of the LED indicators.................................
1. Product information 1.1 What's in the box 1 1 1 1 Лазерный принтер Драйверы Утилита Документация 1 Pantum серии P1000/P2000 AA2 E0 5 4 9 DQ0 С 201 1 Zh uh V1 . 0 0 ai S e in e Tec h no lo g y C o. , L td .
1.
1.3 Overview 1.3.
1.3.
1.4 Printer installation 1.4.1 Power supply 1.4.2 Environment Note: 10 - 32.5 C 50 - 90.
2.About paper 2.
2.
2.3 Paper options 2.4 Printing on envelopes and transparencies 2.4.
Note: WARNING 2.4.
2.
3. Printing 3.1 Printing Methods Note: Note: 3.2 Basic printing with Windows 3.2.
3.2.
Note: 13
3.
Note: 3.3.
3.3.2 To change printer driver settings for Windows 3.
3.4.
3.4.2 To reverse the order the pages are printed Note: 3.4.3 To set the orientation of the page on the paper 3.4.
3.5 Using the Paper printer driver settings 210.0x297.0mm 3.5.
3.5.2 To define and manage custom paper sizes Note: 3.5.
3.5.4 To change the feed edge of the paper Note: 3.5.
Note: 22
3.
3.6.1 Printing multiple pages on one sheet of paper Borders Note: Borders Note: Note: 3.6.2 To print a poster (one page on four sheets of paper) 3.6.
3.6.4 To create different printing effects 3.
3.7.
3.7.
3.8 Using the Current Settings function 3.8.
Note: 3.8.2 To save a new set of Current Settings Note: 3.
3.9.
3.9.2 To pause or resume printing a document Note: 3.9.3 To restart printing a document 3.9.
Note: 3.9.
4. Installation and removal of the driver 4.
34
1 2 3 35
4.
5. Control panel operation 5.
5.
6. Routine maintenance 6.1 Consumables 6.1.1 Print cartridge maintenance Note： 6.1.
40
Note: 6.
WARNING WARNING 42
7. Troubleshooting 7.1 Identification 7.2 Indicators 7.3 Common troubleshooting tips 7.3.
44
7.3.
7.3.
PD ABC abcde 12345 47
P 48
7.
50
8. Product specifications and safety information 8.1 Product specifications 8.1.
8.1.2 Media specifications 8.1.
8.1.4 Consumables Note: 8.2 Safety specification information 8.2.1 Radio interference 8.2.2 Laser Safety Information 8.2.
www. pantum.
