M6500/M6550/M6600 Serial Printers FAQ: M6500/M6550/M6600 Serial Printers FAQ: ............................................................................. 1 ① Installation Issues: ...................................................................................................... 5 1. How to set up my Pantum M6500W/ M6550W/ M6600W Series Printer to a Wireless Network easily by one click installation? ( applicable to Wi-Fi or network models) ........ 5 2.
7. How about the standard page yield of toner PA/PB/PC-210? .................................... 34 8. Why the second LED shows orange when I insert a new cartridge?........................... 34 9. What’s the meaning of status displayed by the Status indicator? .............................. 34 10. How to check the printer’s serial number location: .................................................. 34 11. How to check the toner’s serial number location: ....................................................
1. How do I take a mobile print out from Android? ........................................................ 44 2. How do I take a mobile print out from IOS?................................................................ 44 3. How to print a PDF file from Android mobile phone?................................................. 44 4. How to check the Pantum app version in Android system Guide? ............................. 49 5.
8. Why it will be smoked when printing? ........................................................................ 75 9. What is the power requirement will be need? ........................................................... 76 10. How to Print PRN File setting in printer? .................................................................. 76 11. How to do when it shown “0x000000709” Error？ .................................................. 80 12.
3. How to set the fax as Fax Mode on M6600 Series Printer? ................................... 114 4. How to Set the Time Zone Format on M6600 Series Printer? ............................... 115 5. How to close the fax report setting on M6600 Series Printer?.............................. 117 6. How to setting the Fax sending report on M6600 Series Printer?......................... 118 7. How to adjust receiving NO. of rings in fax mode on M6600 Series Printer？ ..... 120 8.
2) Select way 3: “Connect with wifi” and attention to the instructions display in the video.
3) Please make sure that pc is connected with router via network cable or 4) Please connect PC with printer via USB cable to configure printer Wi-Fi wi-Fi
5) After installation is finished, “Installation Complete” interface will pop out, you can select to “print test page” or “Done”.
2. How do I setup a password for my WI-FI Connection? ( applicable to Wi-Fi models) Step1: Make sure M6500/M6550/M6600 Series printer is power on. Step2: Connect to Printer AP by mobile phone or PC. The SSID is start with” Pantum-AP”, and follow with number and character string.
Step3: Visit the Printer Web page via browser, Printer default address is 192.168.223.1 Step4： Enter the printer web page， choose “Log in” Tap. Step5: Input default user name: admin, Default password：000000. And Login. Step6： Select “settings” Tap wireless settings wireless Hot spot. Then set wireless Parameter Authentication either WPA or WPA2.
Step7： Set the password in the tap, then click “apply “. Step8： Disconnect equipment and printer, when reconnect them, it should input the password as step 7 setting.
Remark For M6500/M6550 Series printer, Here is the way to recover factory default setting in case customer forgets the password: Step1: Please select ‘Menu’ Step2: Select’ NO.
Step3: Select’ NO3-Restore set’ by page down Step4: Select’ NO1-YES’, and it will be done. button For M6600 Series printer, Here is the way to recover factory default setting in case customer forgets the password: Step1: Please select ‘Menu’ Step2: Select’ NO.
Step3: Select’ NO3-Restore set’ by page down Step4: Select’ NO1-YES’, and it will be done. button 3. Where can I download the soft wares and drivers for my printer M6500/M6600 Series Printer? Here is the Download Link: M6500W: http://global.pantum.com/global/drive/m6500w-2/ M6500N: http://global.pantum.com/global/drive/m6500n/ M6500NW: http://global.pantum.com/global/drive/m6500nw-2/ M6550NW: http://global.pantum.com/global/drive/m6550nw/ M6550N: http://global.pantum.
http://global.pantum.
Step4: Please click the “Printer model” in the below picture: Step5: At last, please chose your system and “download “at the below of page, it will be done. 4. How to solve the wireless Connection Failed when it showed "The printer cannot connect to any wireless network with the wireless credentials provided"? Reason1: It is inconsistent with the network name, safe mode and password.
It needs to enter the corresponding name, mode and password of internet. Please don’t select “Enter SSID Manually” when you install the driver and select the corresponding internet SSID and safe mode. And then please enter your internet password to configure it. Reason2: The IP of printer and PC are not under the same router. Solution: Please check with your configuration page to confirm the IP address.
5. What’s the WIFI default password of printer’s wireless hotspot? The WIFI default password is “12345678” 6. How to Close Printer WIFI Hotpot Setting? Step1: Log in the IP addresses 192.168.223.1 when your WIFI is connected to the printer.
Step2: Chose “Setting” in the below picture Step3: Chose “wireless Hotpot” at the left column.
Step4: Chose “Close” to apply and it will be done.
7. How to install the Printer with hostname？ Step1: Select ” Wireless network connection.” at the first step. Step2: Select below option and click “next”.
Step3: Select below option and click “next”. 26.
Step5: Click “Next’ after established the wireless connection.
How to check your hostname of printer? Please print the network configuration page on your control panel and then you will see it as below : Step7: it will be done after several minutes.
8. Where can I check the Hotspot IP address？ Please check it on the WIFI configuration information page as below: 9. How to connect the printer under Mac system with cable Setting Guide? Step1: Connect your printer and your laptop with a USB cable. Step2: Click the “System Preferences”-“Pinter & Scanners” Step3: Make sure the printer you need to use is the Default printer.
Step4: Select the document and start to print 10.How to print wirelessly with Mac WIFI Direct via M6500W/ M6550W/ M6600W Series Printers? Step 1: Find device name and IP Address, Print WiFi Configuration Information Pages, Press on the control panel :Menu setting→ Information Report→ Prt net conf.) We will take an example as below:, checking the Device Name in the NCI.
Step 2: According the SSID Name, connect your Laptop with this WIFI.
Step 3: Select the document you want to print and click” Command” +”P” Button. Step 4: Setting the Print parameter then click “Print” and finished. ② Cartridge Issues: 1. How do I replace or install a cartridge? Pull out the seal on the new toner cartridge firstly, and gently shake it for 5 – 6 times , then remove the protective cover , install the toner cartridge in the printer until hearing a “click” sound.
2.
3.
4. How do I check how many pages I have printed so far from M6500/M6550 Series Printer? Take M6550 Printer for example, Click on Operation panel: Menu setting→ Information Report→ Prt Info Page.
5.
6.
7. How about the standard page yield of toner PA/PB/PC-210? The Toner PA/PB/PC-210 page yield is 1600 pages, that is according ISO 19752 standard measure by print 5% coverage document. So when the printer coverage is higher, the page can print should be less. 8.
11. How to check the toner’s serial number location: Please check with below pictures: 12. Why the printout is not clearly and a little whitish which one I just bought? Take out the cartridge, hold the handle of the cartridge and gently shake around 5 to 6 times, so as to make the toner evenly distributed inside the cartridge.
③ Papers Issues: 1. How can I clear any paper jam? Step1: Raise the scanning platform until it is locked. Open the output bin by the upper right ridge of the concave section. Step2: Remove the laser toner cartridge along the guides. Gently draw the jammed paper out along the paper output direction. Step3: After removing the jammed paper, insert the laser toner cartridge into the printer along the guides until you hear a "click" assuring you that the cartridge is fully inserted.
Step4: Neatly put the paper in the tray, and do not carry out the next print until the indicator light resumes print-ready status. 2. Why the printer could not feed paper successfully? There are three possible reasons as below: 1) There is too much paper in the tray: Solution: Remove excess paper from the tray. 2) The print media is loaded incorrectly: Solution: Please correctly load the print media. 3) The print media is beyond the usage specification range.
3. What kinds of paper can I use in my Pantum M6500/ M6550/ M6600 series printer? 4. How to print multipage on one page? Step1: Please double left click your model of your printer in the ‘Devices and Printers’ Step2: Select “printing preferences” after double left click your printer.
Step3: Select “how many pages you want to print in one page” in the Layout.
5. How to adjust letter format in the printing document? Step1: Please check the paper size in the printer’s property if it is the ‘letter size” , follow up with below steps to check : Please double click your model of your printer in the ‘Devices and Printers’ Please change the it to “ Letter (8.
Step2: Please change to ‘letter size’ in the printing document also. 6. How to adjust envelope type in the printing document? Step1: Please double click your model of your printer in the ‘Devices and Printers’ Step2: Firstly, please change the paper size to “DL Env (110*220mm) in the printing preferences .Secondly, change the paper type to “envelope in the printing preferences.
Step3: Please change to ‘letter size’ in the printing document also. ④ Printer Compatible Issues: 1. Does my Pantum Printer works on Windows Mobile? No, our printer did not compatible with Windows Mobile.
2. Is my printer Mac compatible? What are the versions that it is compatible with? Yes, Mac 10.6/10.7/10.8/10/9/10.10/10.11/10.12/10.13 3. Is my printer Linux compatible? What are the versions that it is compatible with? Yes, Ubuntu 12.04/ 14.04/ 16.04/ 18.04 4. Is my printer Windows compatible? What are the versions that it is compatible with? Yes, Microsoft Windows server 2003/Server 2008/Server 2012/XP/Vista/Win7/Win8 (32bit/64bit)/Win8.1(32bit/64bit)/Win 10(32bit/64bit) 5.
8. Is my printer compatible with Linux Debian 9 system? No, our printer did not compatible with Linux Debian 9. ⑤ Mobile Guidance Issues: 1. How do I take a mobile print out from Android? Download APP on Android device Switch on printer hot spot setting print. Pantum APP are applicable to Android OS 4.4-8.0 2. How do I take a mobile print out from IOS? Solution 1) : IOS has print app by itself, so it just need to connect the printer and print.
Step2: Switch on the printer Step3: Connect to the Printer Hotspot
Step4: Open the ”PANTUM” application , click “ Add a printer” button at the top of interface, then s add the printer. Step5: Select the file and print it. Solution 2) Download the ” Mopria ” application .
Step3: Connect to the printer hot spot Step4: Click Settings on the main screen, choose Print, and have Mopria Print Service set to on.
Step6: Select the document, click Step7: Select the printer, click Print. on the upper right corner, and click Print.
4. How to check the Pantum app version in Android system Guide? Step1: Please open the pantum app and click “More” in red circle.
5. How to merge multi-page scanned documents into one PDF from M6550/M6600 (with “W”) Series Printer via Android mobile phone? Please select the “ADF” in the Pantum app, then it can scan multiple pages and save it as one document 6.
Step2: Make sure that the printer "Wi-Fi " button is turn on, then connect the IOS mobile device with wireless network of the printer SSID, the default password is 12345678 Step3: Open the ”PANTUM” application , click “mobile scan”, then click on “Scan”
Step4: Click “select a scanner” in the top, then click “add the IP address”. Enter the printer IP address “192.168.223.1 and connected successfully.
Step5: After the scan completed, the preview interface appears, then click “done” and rename for the file, as shown below: ⑥ General Settings Issues:
1. Is it possible to close the ‘Auto sleeping time’ on M6500/M6550 Series Printer? We cannot close it completely. But we can change the sleeping mode from 1min to 60 minus. Please check with below picture: Menu-- System Settings-- Sleep Time Setting—select the time you needed For M6500/M6550 Series Printer: Note: When the printer is in dormant status, you can wake it up just by pressing any button or sending print task. 2.
Note: When the printer is in dormant status, you can wake it up just by pressing any button or sending print task. 2. How to Restore Factory Setting on M6500/M6550 Series Printer? Step1: Click menu and to choose number by ‘page down’ on the below control panel. Step2: Click”NO.
Step3: Click “NO.3- Restore set” in the menu setting--------“ok” Step4: Select NO.1-‘Yes’ ------then chose ‘OK” it will be done.
3. How to Restore Factory Setting on M6600 Series Printer? Step1: Click menu and to choose number by ‘page down’ on the below control panel. Step2: Click”NO.
Step3: Click “NO.3- Restore set” in the menu setting--------“ok” Step4: Select NO.1-‘Yes’ ------then chose ‘OK” it will be done. 4. How to set the language back to English on M6500/M6550 Series Printer? Please follow up with below steps (I will put two pictures for the different languages, if you still failed to follow up the choosing numbers, maybe you can try to change it with same words.
Step1: Click menu and to choose number by ‘page down’ on the below control panel. Step2: Select ‘NO.3-system set’ in the menu setting ( these two kinds of languages pic are the same meanings), then chose “OK” Step3: Then Select “NO.
Step4: At last select NO.2-‘English”( these two kinds of languages pictures are the same meanings)------then chose ‘OK” it will be done.
5. How to set the language back to English on M6600 Series Printer? Please follow up with below steps (I will put two pictures for the different languages, if you still failed to follow up the choosing numbers, maybe you can try to change it with same words.): Step1: Click menu and to choose number by ‘page down’ on the below control panel. Step2: Select ‘NO.
Step3: Then Select “NO.2-language set” in the system set( these two kinds of languages pic are the same meanings)---------- then chose “OK” Step4: At last select NO.2-‘English”( these two kinds of languages pictures are the same meanings)------then chose ‘OK” it will be done. 6. How to close toner saving status Setting on M6600 Series Printer？ Step1: Select menu on the below control panel Step2: Select ‘NO.
Step3: Select ‘NO.1-toner save set ’ in the system setting Step4: Select ‘NO.
7.
1. How to get the printer to print darker under Windows? It will be changed in the printer’s proprieties------“Layout”-----“Effect”--“Dark” 2. How to get the printer to print darker under Mac? Step1: Click "Print" of the “file” Step2: Click the “Show Deatils” as shown below.
Step3: Chose “Media & Quality” in the option, select from “Draft-Normal- Best” per your request. 3.
Step2: Please chose “the printer that I want isn’t listed” and chose ‘next” , it will be shown as below: Step3: Please chose” adds a local printer or network printer with manual settings” and chose “Next”, it will be shown as below:
Step4: Please chose “Use an existing port” and select “Next”, it will be shown as below: Step5: Please chose ‘have disked” and click “Next”, it will be shown as below: Step6: Please chose “browse” when the windows pop up, it will be shown as below:
Step7: Please chose the “INF file” in the installation package and then chose “Next” it will be done. Step8: It will be finish to installation automatically after you pull up the printer’s USB cable.
4. How to “add a printer “by manually under Mac? Step1: At first, please follow up the instruction of the CD-ROM to install the driver with USB that is under the MAC system. Step2: After installed the driver, please chose the Printer icon in PC and log in. Step3: Click “+” to add the printer. Step4: Please choose the corresponding model from installed printer when pop up the dialog box. Then chose the corresponding printer’s driver which installed on PC. (It is needed to be the same with printer model.
Remark: If the internet needs to set up manually. You can chose to IP modified at the forth step. Modify the IP address need to match to the IP agreement. Here is the printer’s name without modifications. Please chose the corresponding driver which installed on PC.(it is need to be the same with printer model.) Step5: After chose to save, it will be finished to install the internet printing.
5. How to do Duplex Printing on Windows system? Please change your printer’s properties as below steps. Step1: Please chose the model of your printer in “device and printer” Step2: Double left click the printer-printer’s properties –preferences Step3: Please choose ‘Long Edge ” or “Short Edge” in duplex printing.
6. How to cancel the “duplex printing” under Windows? Please change your printer’s properties as below steps. Step1: Please chose the model of your printer in “device and printer” Step2: Double left click the printer-printer’s properties –preferences Step3: Please choose ‘NONE” in duplex printing.
7. How to cancel a printing job in the queue? Regarding the issue about your printer, please kindly check with below steps, you need to end the printing job in the printing queue: Step1： Please double click your model of your printer in the ‘printer and device”, the picture will be shown as below: Step2： Please right click the printing task that you want to stop. It will be shown as below: Step3：Please chose “cancel”, it will stop printing job. 8.
during paper out of the printer, it would exchange its temperature with surrounding environment. 1, Print environment: when the temperature becomes much lower, the humidity will be much higher, so the vapor will get heavy. Due to the temperature difference and moist， the water vapor will produce accordingly. Usually, we suggest the printing temperature is 10-32℃, Humidity (RH) is 20%-80%, and it will work fine.
Step2: Click "Properties" of the printer Step3: Please check your original port in the port and keep it in mind
Step4: Please change your original port to “FILE:Print to File”. Step5: Please choose any file you want to print and save it on the ‘Desktop’ as “123.
Step6: Please find the ‘123.prn” file on the desktop and send it to us.
11. How to do when it shown “0x000000709” Error？ Reason: 1. The compatibility issue about Windows system 2. When both of windows and XP sharing the same network, and the XP as the main host will be led to this problem. Solution A: Step1: Select “Manage” in the “This PC”. Step1: the “This PC”. Step2:Select Select“Manage” “windowsinfirewall” and right click to “run” it. Restart your computer after you run the windows firewall.
Solution B: Step1: Select “Manage” in the “This PC”. Step2: Select “Print Spooler” and right click to “run” it. Restart your computer after you run the windows firewall.
Step3: Please enter “win+ R” and open “operation” window, please enter the IP address which is from the sharing this printer’s XP computer and then press “Enter” Step4: please Right click “connect” in the listed printer. It will be installed the driver directly.
Step5: After done all above steps, you will see the connected printer in the “ Devices and printers” 12. How to change the printing port is available when it showed” Printing port is on used” ? "Printer cannot be configured because printing port is on used." it may cause by PC port is abnormal. We suggest that you can check with below steps: Step1: Change to another PC port then reconnects to the printer and re-install the driver.
13. How to download the User Manual Successfully? Here are two options for you to download the user manual for the printer’s Option A) Please check the user manual in the CD-ROM. Step1: Open your CD-ROM file and double click “Auto run”. Step2: Click ‘User Guide’ at the left corner of the installation interface.
Option B) Please download the user manual from our official website. Step1: Please log in the website: http://global.pantum.com/global/.
Step3: Select the model of your printer. Step4: Chose the corresponding language you are using which stat to download the user manual.
14. How to register for printer warranty on-line? Step1: Register your account in the website: https://service.global.pantum.com/user/login/register.
Step3: Please chose “Product Registration”, the picture will be shown as below: Step4: At last, you can register for your printer at the below of page, it will be done.
15. How to Print Information Pages from M6500/M6550 Series Printer? Step1: Click menu and to choose number by ‘page down’ on the below control panel. Step2: Click”NO.3-system set” by ‘up and down’ button in the menu setting, and then chose “OK” Step3: Click “NO.4-Info.
Step4: Select NO.2-‘Prt Info Page’ ------then chose ‘OK” it will be done. 16. How to Print Information Pages from M6600 Series Printer? Step1: Click menu and to choose number by ‘page down’ on the below control panel.
Step2: Click”NO.3-system set” by ‘up and down’ button in the menu setting, and then chose “OK” Step3: Click “NO.5-Info.
Step4: Select NO.2-‘Prt Info Page’ ------then chose ‘OK” it will be done. 17. Why the printer could not print the horizontal line in the page when printed out? Step1: Open the protecting cover of the LSU using the screwdriver.
Step2: Pull out the cable and reinsert it again.( The connecting of the LSU's cable and outlet has something wrong ,so the transmitted signal is abnormal.) 18. How to do Duplex Printing on Mac system? Step1: click on “file ” then select “print” Step2: then select the “Two-Sided” option and then try to print it.
⑧ Scan Issues： 1. How to Scanning on Linux System? Step1: Make sure that you printer is connected to the computer with USB cable.
Step4: Please chose “preferences” to go to the next step (it will be shown as below): Step5: Please chose "Page down" arrow in the scan source to go to the next step Step6: Then you can choose the corresponding model about your Pantum printer
Step7: At last, please chose “scan” that will be done. 2.
Step2: Please double click “internet protocol” then it will be entered into the next step: Step3: Please click “more settings”; it will be entered into the next step: Step4: Please chose” advanced”, but please don’t tick the” (SSL)”, and then set up the outgoing server port as “25”, at last please click” ok”.
3. How to set up ‘scan to email’ Setting？ Step1: Type the IP address in the Web browser's address bar to access the embedded Web server of the printer. Check the IP address with below steps: 1. Select “network info” 2. Select“1.TCP/IP” in the network info 3. Select “1.IP Add.” 4. At last you will see it.
Step2: Click on "Setting"—"SMTP" to set the relative parameters of the SMTP Protocol. After finishing setting, click on "Apply" to save. Check with below steps for the email setting: 1. Log in email first, and then click ‘tools’------“account” 2.
3. Click “more settings”; it will be entered into the next step: 4. Please chose” advanced”, but please don’t tick the” (SSL)”, and then set up the outgoing server port as “25”, at last please click” ok”.
Step3: Click on "E-mail Address Book" in the left setting column to enter into the settings interface Step4: Click on new and the following window will pops up, edit the name of contacts, Input the E-mail address and then click on "Submit".
Step5: Put the document on the platen. Step6: Press "Scan" button on the control panel, and press "▲" or "▼" to select "1. Single Page Scan" or "2. Merge Scan", then press "OK" button. Step7: In the "1. Scan To" interface, press "OK" button. Step8: Press "▲" or "▼" to select "Scan to E-mail" and press "OK" button. Step9: Press "▲" or "▼" to select "E-mail Address Book" or "Group Mail" and press "OK" button.
4. How to merge multi-page scanned documents into one PDF from M6500/M6550 Series Printer?? Step1: Press "Scan" button to enter scan status. The default scan mode of control panel is Single Page. Step 2: Press "▲" or "▼" button to select and enter "Merge Scan" mode. Step 3: Press "Start" button and the Scan Process Bar Interface will pop up on the computer.
Press "Start" button - scan the next page Press "OK" button- end the scanning Step 5: Put the document to be scanned on the glass platen and press Start button to continue to scan the second page (For ADF scanning, it can run continuous scan directly). Step 6: Repeat the operation as described in the step 5 to scan multi-pages till you press "OK" button to end this operation. Step 7: After completing the operation, the application will save PDF document to the specified folder. 5.
Step 2: Press "▲" or "▼" button to select and enter "Merge Scan" mode. Step 3: Press "Start" button and the Scan Process Bar Interface will pop up on the computer.
Step 5: Put the document to be scanned on the glass platen and press Start button to continue to scan the second page (For ADF scanning, it can run continuous scan directly). Step 6: Repeat the operation as described in the step 5 to scan multi-pages till you press "OK" button to end this operation. Step 7: After completing the operation, the application will save PDF document to the specified folder. 6.
⑨ Copy Issues： 1.
Step2: Select “NO.1-Image quality” in the copy setting Step3: Select “No.4-Text” in Image quality , and it will be done. Step5: Select “NO.
Step6: Select “No.1-Custom/ manual” and adjust to full dark by press direction pad "▲" will be done. ⑩ Fax-For M6600 Series Printer: 1. How to change the fax report status on M6600 Series Printer? Step1: Select menu on the below control panel Step1: Select ‘NO.3-fax setting’ by page down button.
Step3: Select ‘NO.4-fax report’ in the fax setting Step4: Select ‘NO.2-confirm report’ Step5: Then you can choose the report status of “NO.1 Close” “NO. 2 Print send” ,“NO. 3 Print receive” ,” NO. 4 Always print” by page down button.
2. How to set the fax as Phone Mode on M6600 Series Printer? Step1: Select menu on the below control panel Step3: Select ‘NO.3-Fax setting’ in the menu setting Step2: Please choose “page down” to select Step4: Select “NO.
Step5: Select NO.1- “Answer mode”-“ok” Step6: Select No.2“Phone mode” ,and it will be done.
3. How to set the fax as Fax Mode on M6600 Series Printer? Step1: Select menu on the below control panel Step3: Select ‘NO.3-Fax setting’ in the menu setting Step2: Please choose “page down” to select Step4: Select “NO.
Step5: Select NO.1- “Answer mode”-“ok” 4. Step6: Select No.1“Fax mode”, and it will be done.
Step3: Select ‘NO.4-system set’ in the menu setting Step5: Select NO.5- “Time format”-“ok” Step4: Select “NO.6-Time/date” in the system set Step6: Select “12H or 24H” format in the Time format.
5. How to close the fax report setting on M6600 Series Printer? Step1: Select menu on the below control panel Step3: Select ‘NO.4-fax report’ in the fax setting Step2: Select ‘NO.3-fax setting’ by page down button. Step4: Select ‘NO.
Step5: Then you can choose the report status of “NO.1 Close”, it will be done. 6. How to setting the Fax sending report on M6600 Series Printer? Step1: Press “Menu” Button on the control Step2: Press “page down” Button to panel, as the arrow indicated. select “3.Fax setting” ,then press ”OK”.
Step3: Select “2.Confirm report” by “page Step4: Select “2.Confirm report” by “page down” button, then press “OK”. down” button, then press “OK”. The setting is done. Other Tips: at step4, we can select “3. Print receive” or “Always print” option through “page up/down” button for other report request.
7. How to adjust receiving NO. of rings in fax mode on M6600 Series Printer？ Step1: Please select ‘Menu’ Step2: Select’ NO.
Step3: Select’ NO3-Restore set’ by page down Step4: Select’ NO1-YES’, and press ’OK’ button button it will be done. Step5: Select’ NO2-Receive set’ in fax setting Step6: Select’ NO2-NO.
Step6: Press the NO. of rings’, and press ’OK’ button it will be done. 8. How to create a new contact by M6600NW on M6600 Series Printer？ Step1: Press "Fax" and then chose "Ok" to enter the "Fax Setting" interface Step2: Choose the “8.Contacts” option you want to set by pressing the page up and down keys.
Step3: Select “NO.1 Contacts” Step4: Enter the fax number one by one by pressing the number on the “NO.
Step5: It will be taken an example as below: 9. How to close the report when toner low Setting on M6600 Series Printer？ Step1: Select menu on the below control panel Step2: Select ‘NO.3-fax setting’ by page down button.
Step3: Select ‘NO.2-Receive set,’ in the fax Step4: Select ‘NO.8-cont.low toner’ Step5: Then you can choose the status of “NO.1 Close” and press ‘OK” button, it will be done.
