216 50 LB. ADD-ON KIT WARNING: Read and follow all directions for each step to insure proper asembly of this product. ASSEMBLY INSTRUCTIONS CLASS H PART # 7016801 REV.
PARTS LIST KEY 1 2 PART # 6939201 7095801 DESCRIPTION WEIGHT PLATE WEIGHT STACK SHAFT QTY 5 1 KEY PART # DESCRIPTION QTY 3 6978101 WEIGHT STACK LABEL 1 4 6382301 WEIGHT PLATE BUSHINGS (10 CT) 1 4 1 FIGURE 1 STEP 1: • Insert two WEIGHT PLATE BUSHINGS (4) into each of the five WEIGHT PLATES (1) as shown in FIGURE 1.
STEP 2: WEIGHT STACK CABLE • Unscrew the WEIGHT STACK CABLE from the 15 HOLE WEIGHT STACK SHAFT as shown in FIGURE 2. 15 HOLE WEIGHT STACK SHAFT • Remove the WEIGHT STACK PIN from the 15 HOLE WEIGHT STACK SHAFT as shown. WEIGHT STACK PIN FIGURE 2 FIGURE 3 STEP 3: • CAREFULLY remove or loosen bolts in the TOP BOOM to allow the GUIDE RODS to be tilted. Refer to the GYM ASSEMBLY INSTRUCTIONS .
E-RING STEP 4: • Remove the E-RING and the old WEIGHT STACK SHAFT from the HEAD PLATE. (NOTE: Please discard the old WEIGHT STACK SHAFT.) HEAD PLATE • Slide the new 20 HOLE WEIGHT STACK SHAFT (2) thru the hole in the HEAD PLATE and lock in place using the previously removed E-RING as shown in FIGURE 4. 2 FIGURE 4 SHAFT COLLAR STEP 5: • Insert the two GUIDE RODS through the two WEIGHT STACK CUSHIONS into the base as shown in FIGURE 5.
STEP 6: • Assemble the WEIGHT STACK PIN to the 20 HOLE WEIGHT STACK SHAFT as shown. • Screw the WEIGHT STACK CABLE into the 20 HOLE WEIGHT STACK SHAFT of the HEAD PLATE until the CABLE slightly pulls on the HEAD PLATE. • WEIGHT STACK CABLE 20 HOLE WEIGHT STACK SHAFT TIGHTEN cable jam nut securely! • CAREFULLY assemble and SECURELY tighten any previosly removed or loosened bolts in the TOP BOOM to allow the GUIDE RODS to be secured. Refer to the GYM ASSEMBLY INSTRUCTIONS .