"OH YES!One More Thing ...
This device contains FCC ID: YZY-HT205 and IC ID: 9261A-HT205. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications of this product, not approved by the manufacturer, may void the user’s authority, to operate the equipment.
SAFETY PRECAUTIONS: Read this section carefully before proceeding! WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Talk About Sub Yoga Check out this positioning matrix. No Paradigm sub has ever offered so many placement options … Thanks for choosing a Paradigm sub! And congrats! It’s obvious you have great taste since you’ve chosen the world’s #1 Speaker Brand! We’re not blowing smoke, we’ve been voted #1 twenty times* (the only speaker manufacturer in the world that can claim that achievement!).
TOC Finding the spot pg 1 Taking a stand pg 2 Down under pg 2 Art Attack! Wall mounting pg 3 Hookin’ up pg 6 Watts up? Fine tuning pg 3 pg 7 Getting the best from my sub Geek Alert … Technology Tidbits pg 4 pg 8 Going wireless Tech Specs pg 5 pg 9 Twins are more fun Warranty … your new sub is family now, treat it well pg 5 pg 10
Finding the spot PLEASE NOTE: Wall-mounting requires the MilleniaSub Wall-Mount Bracket system (sold separately, see dealer) Audio is all about finding ‘the spot’ … the sweet spot* in seating gets a lot of attention but so should finding the right spot for your sub. In a traditional setup, for best sonic integration, locating your sub between your front speakers, beside one of them or close to the back wall will usually provide the best bass performance. Fig. 1a and Fig.
Taking a stand x1 x2 x4 Fig. 2 Down under “Suck up the dust bunnies before you put me under the couch, allow 2.5 cm (1˝) clearance and make sure I sit this way up!” x4 Close-up 13.75 cm (5-1/2 in) 35.5 cm (14 in) x4 x4 Fig. 3 46.
Art Attack! Wall mounting Side view Fig. 4 Complete instructions for wall mounting your sub included with the MilleniaSub Wall-Mount Bracket system (sold separately, see dealer) Watts up? The Watts (W) rating indicated on the rear panel of your sub is the typical AC power the subwoofer will draw. Keep in mind, the actual wattage draw will vary with the bass content of the program material.
Getting the best from my sub Break-In Although your new sub will sound great right out of the carton, it will sound even better when broken in. Let it operate for several hours before you listen critically. If it has been transported or stored in the cold, allow it to warm to room temperature before you listen. Cleaning Use a damp (not wet!) soft cloth to clean. Never use a strong or abrasive cleaner on your sub.
Going wireless TIP! Our PT-2 transmitter will work with up to four MilleniaSubs simultaneously Placement plays a major role in optimizing bass performance. However, it can impose the inconvenience not to mention the unsightliness of running long lengths of cable through walls, along baseboards and under floors and carpets.
Hookin’ up TIP! We recommend the use of high-quality cables and connectors when hooking up your subwoofer (see dealer) Turn all components OFF before connecting the sub Input Line-Level (RCA) Input IMPORTANT: Speakers set to ‘Large’ with your A/V receiver or processor will still be reproducing bass frequencies so be very careful not to overdrive them! Allows connection from the Sub/LFE Output of an A/V receiver, processor or other suitable low-level source.
Fine tuning TIP! Use a slot-head screwdriver or even a large coin to adjust the controls on the side panel of your new subwoofer Once you have the rest of your speakers positioned in the room and have set speaker distances and calibrated speaker levels with your processor or A/V receiver, it’s time to fine tune your sub. Subwoofer Controls When setting the subwoofer controls use music and video soundtracks that you know well.
Geek Alert … Technology Tidbits “How cool am I? What other brand gives you the inside story on your sub in the Owners Manual.” The Inside Story DESIGN WHAT’S COOL THE THINKING BEHIND IT Maximum versatility … more positioning options than a swami teaching yoga in an ashram! See our Positioning Matrix in the beginning of this manual! WOOFER Dual-woofer back-to-back bipolar design—inherently vibration cancelling.
Tech Specs Design Dual driver, sealed box, vibration cancelling, built-in Ultra-Class-D™ power amplifier, built-in wireless receiver for wireless option, USB port for PBK equalization Amplifier: High-Current, Discrete Output 900 watts Dynamic Peak / 300 watts RMS Sustained Amplifier Design Features Auto-on, soft clipping, thermal monitoring Bass Drivers Two 355-mm x 76-mm (14 in x 3 in) reinforced polymer cones, corrugated Santoprene® surrounds, 25-mm (1 in) voice-coils Low-Frequency Extension* 21
Warranty … your new sub is family now, treat it well! Paradigm® Reference subwoofers are warranted to be and remain free of manufacturing and/or material defects for a period of three (3) years from the date of the original retail purchase. Within this specified period, repair, replacement or adjustment of parts for manufacturing and/or material defects will be free of charge. Thermal or mechanical abuse/misuse is not covered under warranty.
Paradigm, Paradigm Reference, MilleniaSub and all associated proprietary and patented designs and technologies are registered trademarks of Paradigm Electronics Inc. Copyright © Paradigm Electronics Inc. All rights reserved. All other trademarks are the property of their respective owner(s). Paradigm Electronics reserves the right to change specifications and/or features without notice as design improvements are incorporated. Jason Hartog Photography. Printed in Canada.
NEW FROM PA R A D I G M A Music and HT System designed to deliver multiple OH’s! Available as a 5.0 or 2.0 system … for OH! music, movies and best sound and impact on the market for gaming! The 2.0 system also ideal as rear speakers in a knock ’em dead 7.1 system! Includes tabletop stands. OH! WOW Compact die-cast aluminum speaker enclosures. Superior rigidity in a thin, sexy design that allows for larger, more powerful drivers.
Molded 1˝ Aluminum Domes … anodized silver color finish. Powerful rare-earth neodymium magnets deliver incredible energy in the gap! Single-Piece 4˝ Aluminum Bass/Mid Cones … anodized silver color finish. Single-piece construction allowed us to improve the cone modal vibration pattern and bingo — better frequency response immediately.
900 Watts Dynamic Peak Power 300 Watts RMS Sustained 14˝ x 3˝ cone … just shy of a full inch of peak-to-peak cone travel! Back-to-Back Bipolar Dual-Woofer Design … inherently vibrationcanceling. Woofers fire in opposite directions resulting in a physical cancellation of cabinet vibrations and a massive reduction in the potential for sound-destroying resonances.
Design (each speaker including center channel) 2-driver, 2-way vented die-cast aluminum enclosures with integrated baffle and chassis. Low-diffraction grilles maximize imaging and ensure smooth dispersion. Crossover 3rd-order electro-acoustic at 2.
«AH OUI! Encore une chose ...
