REFERENCE COLLECTION MILLENIA LP 2 MILLENIA LP XL ™ ™ ™ HIGH-DEFINITION SOUND OWNERS MANUAL Paradigm Electronics Inc.
IMPORTANT: ASSEMBLY INSTRUCTIONS FOR SPEAKER STANDS (INCLUDED WITH SPEAKERS) ARE FOUND IN THE BOX WITH THE STAND. IMPORTANT: READ BEFORE WALL-MOUNTING YOUR SPEAKERS. Wall mount your speakers securely enough that they cannot fall and cause personal injury or damage to property. Use safety straps where supplied. Detailed information on attaching the safety straps is included in the section on Installation later in the manual. Paradigm DOES NOT supply hardware for mounting speakers to the wall.
THE TECHNOLOGY BEHIND YOUR NEW SPEAKERS YOUR NEW SPEAKERS High-Frequency Drive Units Break-In • S-PAL Satin-Anodized Pure-Aluminum Dome Although your speakers will sound great ‘out of the carton’, they will sound even better once they are ‘broken in.’ Allow them to play for several hours before you begin to listen critically. • Rigid Mineral-Filled ABS Chassis Drivers use ferro-fluid that can thicken at temperatures below 10° C (50° F).
HOW TO AVOID SPEAKER DAMAGE (continued) PLACEMENT There is a Limit! The following placement guidelines will help you get the best performance from your speakers. Illustrations showing you how to attach the speakers to the wall are provided in the section following. Although more powerful amplifiers are safer, there is a point at which you could have more power than the speaker can handle. At that point you will overpower the speaker and damage it.
PLACEMENT (continued) WALL-MOUNTING 3.258” up to If you are not comfortable performing the following instllation procedure, have a professional perform the installation (see your dealer about hiring a professional). 3.258” IMPORTANT! Installation instructions are for ALL MODELS. If you own the Millenia LP XL there will be an additional screw and hole (see diagram at right). Fig. 1 Fig. 2 OR Fig.
WALL-MOUNTING (continued) CONNECTION 3.258” Turn your amplifier OFF before connecting speakers. This will avoid damage which could result from accidental shorting of speaker cables. The following chart identifies the minimum gauge requirements for various cable lengths: MINIMUM GAUGE REQUIREMENTS Step 3 Remove the two flathead screws (not shown). Drill inner pilot holes then press anchor bolts firmly into drywall and screw in. Now insert all four flathead screws and tighten.
TECHNICAL SPECIFICATIONS MILLENIA™ LP 2 Design 5-driver, 2-way bass-reflex includes powered drives and passive radiators in an ultra-thin high-gloss enclosure Design 7-driver, 2-way bass-reflex includes powered drivers and passive radiators in an ultra-thin high-gloss enclosure Crossover 2nd-order electro-acoustic at 2.6 kHz Crossover 2nd-order electro-acoustic at 2.
LIMITED WARRANTY Your new speakers are warranted to be and remain free of manufacturing and/or material defects for a period of five (5) years from the date of original purchase. Within the time period specified, repair, replacement or adjustment of parts for manufacturing and/or material defects will be free of charge to the original owner. Thermal or mechanical abuse/misuse is not covered under warranty.
