REFERENCE COLLECTION TM Series Owners Manual
IMPORTANT! READ BEFORE WALL-MOUNTING PARADIGM PRESTIGE 25S SURROUND/REAR SPEAKERS: Wall mount your Paradigm Prestige 25S speakers securely enough that they cannot fall and cause personal injury or damage to property. Paradigm DOES NOT supply hardware for mounting Paradigm Prestige 25S speakers to the wall. Always use screws appropriate for wall type and weight of speakers. If installing into drywall, install into 1/2˝ (13 mm) or 5/8˝ (16 mm) drywall only.
TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . 1 Unpacking Instructions (Floorstanding Speakers) Securing Rubber Feet (Floor) or Spikes (Carpet) . . . . . . . . . . . . . . . . . . . 2 General Tips . . . . . . . . . . . . . . . . . . . . . . . 3 Break in . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Preventing Speaker Damage . . . . . . . . . Amplifier Distortion — The #1 Culprit! . .
UNPACKING INSTRUCTIONS (FLOORSTANDING SPEAKERS) Securing Rubber Feet (Floor) or Spikes (Carpet) IMPORTANT! Follow These Steps Before Proceeding! IMPORTANT! When removing the speaker from the carton, ensure belt buckles, rings or other jewellery do not come into contact with the speaker and scratch the finish.
GENERAL TIPS Break-In Although Paradigm Prestige speakers sound great “out of the carton,” they will sound even better once they are “broken in.” Allow them to play for several hours before you begin any critical listening. NOTE: If your speakers have been transported or stored in the cold, let them warm to room temperature before use. Cleaning Prestige speakers have a durable premium finish. To clean, use a damp soft cloth. Do not use a strong or abrasive cleaner.
PREVENTING SPEAKER DAMAGE (continued) Remember, all amplifiers produce distortion when operated beyond their rated output power. The resulting distortion will damage all speakers! Exercise caution! If you listen at loud levels, be careful to listen for the point of audible distortion—if the speakers begin to sound distressed turn the Volume Control down or your speakers and/or amplifier(s) will be damaged! This type of damage constitutes abuse and is not covered by the warranty.
STAND MOUNTING (optional) The Paradigm Prestige 55C and Prestige 45C center channel speakers can be mounted to Paradigm’s J-18C stand if desired. Ask your Paradigm dealer for details.
ATTACHING BUMPER PADS TO BOOKSHELF/CENTER/ SURROUND SPEAKERS IMPORTANT! To prevent damage to your speaker’s finish, place the top side of your speaker on a soft surface (rug, blanket, etc.) before applying the bumper pads to the bottom side corners. Bookshelf and Center Speakers Self-adhesive bumper pads (included) should be applied to the bottom corners of Paradigm Prestige bookshelf and center-channel speakers (see illustrations below) when placed on a shelf or other flat surface.
PLACEMENT: FRONT LEFT & RIGHT SPEAKERS Pardigm Prestige front speakers are designed to allow flexible placement while providing a very large window of sound throughout your listening room.
PLACEMENT: FRONT LEFT & RIGHT SPEAKERS (continued) Accurate Timbre For the most accurate and natural timbre, place front speakers so that their highfrequency drivers are approximately at ear level, as shown below. Placing bookshelf models on Paradigm speaker stands (sold separately) or bookshelves raises their high-frequency drivers to approximately ear level, thereby ensuring the best performance possible.
Balanced Bass Placing front speakers in corners will over-emphasize bass and reduce overall clarity. Avoid corner placement. Position front speakers 8 in (20 cm) or more from the wall behind the speaker and as much as possible from either side wall, as shown below. This will ensure better bass performance and optimal midrange clarity.
PLACEMENT: FRONT LEFT & RIGHT SPEAKERS (continued) Optimal Imaging Measure the distance from your main listening area to the front speakers (“X”). For best imaging, place speakers from three-quarters of that distance up to that same distance from each other (3/4 of “X” to “X”), as shown. To further optimize imaging, toe speakers slightly inward so they point toward the listening position with their axes crossing just behind it, as shown.
PLACEMENT: CENTER SPEAKER Paradigm Prestige Series center channel speakers are designed to cover a large, wide listening area, allowing listeners throughout the room to hear center-channel information with unprecedented clarity and intelligibility. Placing your center-channel speaker below (or above) the TV will ensure the best possible clarity and intelligibility. Position the speaker flush with the front of the TV or speaker shelf to minimize unwanted sound reflections.
PLACEMENT: SURROUND / REAR SPEAKERS 5.1 Surround Configuration Position one speaker on each side of the listening area, as shown below. 7.1 Surround Configuration (adds two rear speakers to a typical 5.1 surround configuration) Position speakers behind the listening area—one speaker slightly right and the other slightly left, as shown. 90˚ 90˚ 110˚ 110˚ Wall Mounting For wall mounting instructions for the Paradigm Prestige 25S, refer to the Wall Mounting Instructions included with the speaker.
SPEAKER CONNECTION IMPORTANT! Turn your amplifier(s) OFF before connecting your speakers. This will avoid damage which could result from accidental shorting of speaker cables. For optimum sound, the use of high quality speaker cable is essential. The chart below identifies the minimum gauge requirements for various lengths (See your Dealer for recommendations). MINIMUM GAUGE REQUIREMENTS LENGTH DIAMETER GAUGE Under 4.5 m (15 ft) 1.3 mm (0.05 in) 16 awg Under 9 m (30 ft) 1.6 mm (0.
SPEAKER CONNECTION (continued) Standard Connection for Prestige 15B Your speakers’ binding posts can be used with banana, pin or spade connectors, as well as with bare wire. Tighten the posts firmly by hand but do not over tighten! Correct polarity (or phase) is critical for proper soundstage imaging and bass performance. Connect one speaker at a time to ensure proper connection of every channel. The red (+) amplifier terminal must be connected to the red (+) speaker terminal.
Standard Connection for All Speakers (Except Prestige 15B) DO NOT attempt to bi-wire or bi-amplify speakers unless you have removed the jumper bars. All Paradigm Prestige speakers (except Prestige 15B) have two sets of input terminals connected externally with jumper bars. These speakers can be bi-wired or bi-amplified to achieve even better performance. For standard connection of speakers with two input terminals, leave the jumper bars attached and connect using either set of input terminals.
SPEAKER CONNECTION (continued) Bi-Wire Connection Bi-wiring can improve clarity and openness with less grain and more solidity to the bass. Two speaker cables are required for each speaker that is bi-wired.
Bi-Amp Connection IMPORTANT! When bi-amping, always use amplifiers with identical gain. If uniform amplifier gain is not maintained the speaker-to-speaker balance will be incorrect when vertically bi-amped, or the speaker system’s frequency balance will be incorrect when horizontally bi-amped. To prevent problems, use identical amplifiers (brand and model). Make sure they are operating in the same non-bridged or bridged mode.
SPEAKER CONNECTION (continued) Passive bi-amping offers a dramatic improvement in clarity, openness and detail, with much better bass solidity and definition. The presentation of music and movie soundtracks is simply more intelligible and transparent. With passive bi-amping, the speaker’s internal passive crossovers remain connected. An external electronic crossover is not required and cannot be used (there is no direct electrical access to individual drive units). This saves expense and setup difficulties.
To Fine tune surround/rear speakers, please follow the illustrations in the earlier section. To Fine tune the subwoofer, please refer to the Owner’s Manual that was included with your subwoofer. BASIC TROUBLESHOOTING Warning: Do not open the product. Under no circumstances should the product be repaired by anyone other than an authorized Paradigm Dealer, as this will invalidate the warranty. Please contact Paradigm Customer Support for more information.
SPECIFICATIONS 20 Prestige 95F Prestige 85F Design 4-driver, 2-1/2 way floorstanding 4-driver, 2-1/2 way floorstanding Crossover 2nd order electro-acoustic at 2nd order electro-acoustic at 2.0 kHz (tweeter/mid); 2nd order 2.
Prestige 75F Prestige 55C Prestige 45C 4-driver, 2-1/2 way floorstanding 6-driver, 3 way centre channel 4-driver, 3 way center channel 2nd order electro-acoustic at 2.0 kHz (tweeter/mid); 2nd order @ 500 Hz (mid/bass) 2nd order electro-acoustic at 2.6 kHz (tweeter/mid), 2nd order @ 750 Hz 2nd order electro-acoustic at 2.
SPECIFICATIONS (continued) 22 Prestige 25S Prestige 15B Design 5-driver, 3 way surround channel 2-driver, 2 way bookshelf / stand mounted Crossover 2nd order electro-acoustic at 2.0 kHz (tweeter), 2nd order @ 600Hz bass) 2nd order electro-acoustic at 2.
LIMITED WARRANTY Paradigm® Prestige™ speakers covered in this manual are warranted to be and remain free of manufacturing and/or material defects for a period of five (5) years from the date of original purchase. Within the time period specified, repair, replacement or adjustment of parts for manufacturing and/or material defects will be free of charge to the original owner. Thermal or mechanical abuse/misuse is not covered under warranty.
NOTES
MD REFERENCE COLLECTION M a n u e l d e l ’u t i l i s a t e u r d e l a s é r i e MD
IMPORTANT : À LIRE AVANT DE MONTER L’ENCEINTE AMBIOPHONIQUE PARADIGM PRESTIGE 25S SUR UN MUR : Fixez l’enceinte ambiophonique Paradigm Prestige 25S de façon sécuritaire pour ne pas qu’elles tombent et causent des blessures ou des dommages. Paradigm NE FOURNIT PAS le matériel pour monter l’enceinte ambiophonique Paradigm Prestige 25S sur un mur. Le matériel de montage illustré l’est à titre d’exemple uniquement; le matériel variera en fonction du type de mur.
TABLES DES MATIÈRES Introduction . . . . . . . . . . . . . . . . . . . . . . . . 1 Instructions pour le déballage (enceintes au sol) Fixer les pieds en caoutchouc (plancher) ou les crampons (tapis). . . . . . 2 Conseils généraux . . . . . . . . . . . . . . . . . . 3 Rodage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Nettoyage . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pour éviter d’endommager les enceintes . . . . . . . . . . . . . . . . . . . . . . .
INSTRUCTIONS POUR LE DÉBALLAGE (ENCEINTES AU SOL) Fixer les pieds en caoutchouc (plancher) ou les crampons (tapis) IMPORTANT! Procédez comme suit avant de continuer! IMPORTANT! Lorsque vous retirez l’enceinte de la boîte, assurez-vous que votre boucle de ceinture, vos bagues et vos autres bijoux n’entrent pas en contact avec l’enceinte afin d’éviter d’égratigner le fini.
CONSEILS GÉNÉRAUX Rodage Bien que vos enceintes Paradigm Prestige offrent un son excellent « en sortant de la boîte », le son sera encore meilleur après une période de rodage. Laissez-le fonctionner pendant plusieurs heures avant toute écoute critique. Les haut-parleurs des hautes et moyennes fréquences contiennent un ferrofluide dont la viscosité augmente à des températures inférieures à 10° C (50° F).
POUR ÉVITER D’ENDOMMAGER LES ENCEINTES (continued) de la plupart des amplificateurs à une position entre 11 h et 13 h sur le cadran fournit environ la puissance nominale de l’amplificateur, à moins que les fonctions de compensation (bass/ treble ou loudness) ne soient utilisées, dans lequel cas la puissance nominale pourrait être atteinte à un réglage plus faible de la commande de volume.
MONTAGE SUR UN SUPPORT (facultatif) L’enceinte de canal central Paradigm Prestige 55C et Prestige 45C peut être montée sur un support J-18C de Paradigm si vous le souhaitez. Demandez à votre revendeur de Paradigm pour obtenir plus de détails.
FIXER LES COUSSINETS AMORTISSEURS À DES ENCEINTES SUR ÉTAGÈRE/CENTRALES/AMBIOPHONIQUES IMPORTANT! Pour prévenir les dommages au fini de votre enceinte, placez la partie supérieure de votre enceinte sur une surface molle (tapis, couverture, etc.) avant de fixer les coussinets amortisseurs aux coins de la partie inférieure.
POSITIONNEMENT : ENCEINTES AVANT DROITE ET GAUCHE Les enceintes avant Prestige de Paradigm sont conçues pour permettre un positionnement souple tout en offrant une très grande fenêtre de sons dans toute la salle d’écoute.
POSITIONNEMENT : ENCEINTES AVANT DROITE ET GAUCHE (suite) Précision du timbre sonore Pour obtenir le timbre le plus précis et le plus naturel possible, placez les enceintes avant de sorte que le son émanant des haut-parleurs de hautes fréquences parvienne à l’auditeur environ au niveau des oreilles, comme illustré.
Graves équilibrées Le positionnement des enceintes avant dans les coins de la pièce accentuera trop les graves et réduira la clarté du son. Évitez de placer les enceintes dans les coins. Positionnez chaque enceinte à 20 cm (8 po) ou plus du mur situé derrière elle et le plus loin possible des murs latéraux, comme illustré. Ainsi, vous obtiendrez un meilleur rendement des graves et une clarté maximale des fréquences moyennes.
POSITIONNEMENT : ENCEINTES AVANT DROITE ET GAUCHE (suite) Image optimale Mesurez la distance de la principale aire d’écoute aux enceintes avant (distance « X »). Pour une image sonore optimale, placez les enceintes aux trois quarts de cette distance et jusqu’à cette même distance l’une de l’autre (3/4 de X à X), comme illustré. Pour une image encore meilleure, orientez les enceintes légèrement vers l’aire d’écoute de sorte que leurs axes se croisent juste derrière cette dernière, comme illustré.
POSITIONNEMENT : ENCEINTE CENTRALE Les enceintes de canal central de la série Prestige de Paradigm sont conçues pour couvrir une vaste aire d’écoute, permettant à des auditeurs dans toute la pièce d’entendre un signal du canal central d’une clarté et d’une intelligibilité sans précédent. Pour obtenir une clarté et une intelligibilité maximales, placez l’enceinte de canal central au-dessous (ou au-dessus) de la télévision.
POSITIONNEMENT : ENCEINTES AMBIOPHONIQUES/ARRIÈRE Configuration ambiophonique 5.1 Placez une enceinte de chaque côté de l’aire d’écoute, comme illustré. Configuration ambiophonique 7.1 (ajoute deux enceintes arrière à une configuration ambiophonique 5.1 typique). Placez les enceintes derrière l’aire d’écoute – une légèrement à droite, l’autre légèrement à gauche, comme illustré.
RACCORDEMENT IMPORTANT! Éteignez l’amplificateur avant de raccorder les enceintes. Vous éviterez ainsi les dommages qui pourraient survenir lors du court-circuit accidentel des câbles d’enceinte. Pour obtenir un son optimal, il est essentiel d’utiliser des câbles de haute qualité. Le tableau ci-dessous indique les exigences minimales de calibre pour les différentes longueurs de câble. (Voir le revendeur pour obtenir de plus amples renseignements).
RACCORDEMENT (suite) Raccord standard pour le modèle Prestige 15B Les bornes de raccordement des enceintes peuvent être utilisées avec des prises bananes ou à broches ou des cosses rectangulaires, ainsi qu’avec des fils nus. Serrez les bornes fermement à la main, mais pas excessivement! Pour une bonne image sonore et un bon rendement des graves, la bonne polarité (phase) est nécessaire. Raccordez une enceinte à la fois pour assurer le bon raccordement de chaque canal.
Raccord standard pour tous les modèles (à l’exception du Prestige 15B) NE PAS raccorder les enceintes par bi-câblage ou bi-amplification avant d’avoir retiré les barrettes de court-circuit. Toutes les enceintes Paradigm Prestige (sauf le modèle 15B) sont dotées de deux ensembles de bornes raccordées de façon externe à des barrettes de court-circuit.
RACCORDEMENT (suite) Bi-câblage Le bi-câblage peut améliorer la clarté, l’amplitude et la robustesse des graves tout en réduisant la granulation. Deux câbles sont nécessaires pour chaque enceinte ainsi raccordée.
Bi-amplification IMPORTANT! Pour la bi-amplification, toujours utiliser des amplificateurs présentant un gain identique. Si un gain d’amplificateur uniforme n’est pas maintenu, l’équilibre enceinte-à-enceinte sera incorrect en mode vertical, alors que l’équilibre des fréquences du système d’enceintes sera incorrect en mode horizontal. Pour éviter ces problèmes, utilisez des amplificateurs identiques (de mêmes marque et modèle).
RACCORDEMENT (suite) La bi-amplification passive améliore considérablement la clarté, l’amplitude et les détails du signal, ainsi que la robustesse et la précision des graves. La reproduction musicale ou de trames sonores est tout simplement plus claire et transparente. Avec la bi-amplification passive, les filtres passifs (crossover) internes de l’enceinte demeurent raccordés.
En ce qui concerne les enceintes centrales, des modifications pourraient être nécessaires selon le programme multicanaux donné de musique ou de film. Au besoin, réglez les niveaux du processeur ou du récepteur A/V pour obtenir une image sonore globale cohérente. Pour le réglage fin des enceintes ambiophoniques/arrière, suivez les illustrations de la section précédente. Pour le réglage fin du caisson de sous-graves, consultez le guide de l’utilisateur compris avec le caisson de sous-graves.
SPÉCIFICATIONS 20 Prestige 95F Prestige 85F Design 4 haut-parleurs, 2-1/2 voies au sol 4 haut-parleurs, 2-1/2 voies au sol Raccord Électroacoustique 2e ordre à 2.0 Électroacoustique 2e ordre à 2.
Prestige 75F Prestige 55C Prestige 45C 4 haut-parleurs, 2-1/2 voies au sol 6 haut-parleurs, canal central à 3 voies 4 haut-parleurs, canal central à 3 voies Électroacoustique 2e ordre à 2.0 kHz (aigu/moyen); 2e ordre à 500 Hz (moyen/grave) Électroacoustique 2e ordre à 2.6 kHz (aigu/moyen); 2e ordre à 750 Hz Électroacoustique 2e ordre à 2.
SPÉCIFICATIONS (suite) 22 Prestige 25S Prestige 15B Design 5 haut-parleurs, canal ambiophonique à 3 voies 2 haut-parleurs, 2 voies sur étagère Raccord Électroacoustique 2e ordre à 2.
GARANTIE LIMITÉE Vos nouvelles enceintes sont garanties contre les défauts de matériaux et de fabrication pendant une période de cinq (5) ans à compter de la date d’achat du matériel neuf. Durant cette période, la réparation, le remplacement ou le réglage de pièces pour des défauts de matériaux ou de fabrication ne seront pas à la charge du premier acheteur. Les dommages causés par l’exposition abusive à la chaleur ou l’usage abusif ne sont pas couverts par la présente garantie.
NOTES