Modem User Manual

P300H P300 Series Modem Installation and Operating Handbook Page 214
APPENDIX G: FAULT MESSAGES AND ACTION TABLE
The table on the following pages lists the faults which can be shown on the modem display, along with a
description of what the fault means, and the actions the modem will take if such a fault occurs. It also shows
relevant checks the operator might make to try to eliminate the fault condition.
To find a displayed fault in this large table, check only the relevant section depending on the first few words
of the displayed message:
For “Unit Fault...” Check UNIT FAULTS section
For “Warning....” Check UNIT WARNINGS section
For “Tx Fault....” Check TX TRAFFIC FAULTS section
For “Tx Warn....” Check TX TRAFFIC WARNINGS section
For “Rx Fault....” Check RX TRAFFIC FAULTS section
For Rx Warn....” Check RX TRAFFIC WARNINGS section
There are also other screens relating to configuration errors and warnings, and screens which are displayed
simply for user information. Most of these are self explanatory, however if you find you need help
understanding a message not described here, please WRITE DOWN the EXACT TEXT and call us for
support.
Finally, many messages also show “
READ” or “ Note” and display further information if the down arrow
is pressed, this is usually worth reading !