Installation Instructions
Table Of Contents
- Part 1: Introduction
- Part 2: Installation
- Part 3: Programming Methods
- Part 4: Access Codes
- Part 5: Zone Programming
- Part 6: Wireless Features
- Part 7: Arming and Disarming Options
- 7.1 Switch To Stay Arming
- 7.2 Stay Arming with Delay
- 7.3 Regular Arming Switches to Force Arming (Not to be used with UL Installations)
- 7.4 Restrict Arming on Battery Fail
- 7.5 Restrict Arming on Tamper Failure
- 7.6 Timed Auto-Arming
- 7.7 No Movement Auto-Arming
- 7.8 Auto-Arming Options (Not to be used with UL installations)
- 7.9 One-Touch Arming (Not to be used with UL installations)
- 7.10 Exit Delay
- 7.11 Bell Squawk On Arm/Disarm with Keypad
- 7.12 Bell Squawk On Arm/Disarm with Remote Control
- 7.13 No Exit Delay When Arming with Remote Control
- 7.14 No Exit Delay Beeps and No Bell Squawk When Stay Arming
- Part 8: Alarm Options
- Part 9: Reporting and Dialer settings
- 9.1 Reporting/Dialer (Enable/Disable)
- 9.2 Report Codes
- 9.2.1 Arming Report Codes
- 9.2.2 Special Arming Report Codes
- 9.2.3 Disarming Report Codes
- 9.2.4 Special Disarming Report Codes
- 9.2.5 Zone Alarm Report Codes
- 9.2.6 Zone Alarm Restore Report Codes
- 9.2.7 Special Alarm Report Codes
- 9.2.8 Zone Tamper Report Codes
- 9.2.9 Zone Tamper Restore Report Codes
- 9.2.10 System Trouble Report Codes
- 9.2.11 System Trouble Restore Codes
- 9.2.12 Special Reporting Codes
- 9.3 Monitoring Station Telephone Numbers
- 9.4 Partition Account Numbers
- 9.5 Reporting Formats
- 9.6 Pager Delay
- 9.7 Event Call Direction
- 9.8 Dialing Method
- 9.9 Pulse Ratio
- 9.10 Bell on Communication Failure
- 9.11 Dial Tone Delay
- 9.12 Maximum Dialing Attempts
- 9.13 Delay Between Dialing Attempts
- 9.14 Alternate Dial Option
- 9.15 Recent Close Delay
- 9.16 Auto Test Report
- 9.17 Closing Delinquency Timer
- 9.18 Power Failure Report Delay
- 9.19 Disarm Reporting Options
- 9.20 Zone Restore Report Options
- 9.21 Telephone Line Monitoring (TLM)
- Part 10: Programmable Outputs
- Part 11: System Settings
- 11.1 Hardware Reset
- 11.2 Installer Lock
- 11.3 Keypad Lockout Feature
- 11.4 Battery Charge Current
- 11.5 Partitioning
- 11.6 System Real-Time Clock
- 11.7 Clock Adjust
- 11.8 Keypad Tamper Supervision
- 11.9 Keypad Audible Trouble Warning
- 11.10 Confidential Mode
- 11.11 Installer Quick Functions Keys
- 11.12 PGM Modules Supervision
- 11.13 Printer Module Supervision
- 11.14 Zone Expansion Bus Module Supervision
- 11.15 Wireless Transmitter Low Battery Supervision
- 11.16 Wireless Transmitter Supervision Options
- 11.17 Reprogram All Expansion Modules
- Part 12: Settings for WinLoad Software
- Part 13: User Operation
- 13.1 Trouble Display
- 13.2 Programming Access Codes
- 13.3 Disarming & Deactivating an Alarm
- 13.4 Regular Arming
- 13.5 Stay Arming
- 13.6 Instant Arming
- 13.7 Force Arming (Not to be used with UL Installations)
- 13.8 Manual Bypass Programming
- 13.9 One-Touch Arming
- 13.10 Keyswitch Arming
- 13.11 Panic Alarms
- 13.12 Auto-Arming (Not to be used with UL installations)
- 13.13 Alarm Memory Display
- 13.14 Programming Chime Zones
- 13.15 Keypad Muting (Not to be used with UL installations)
- 13.16 Keypad Backlight (1686H and 1686V only)
- FCC Warnings
- Index
Spectra Series 49
INDEX
Numerics
24Hr. Buzzer Zone ...........................................................14
24Hr. Delayed Fire Zone .................................................15
24Hr. Standard Fire Zone ................................................15
A
AC Failure Report Code ..................................................29
AC Power ...........................................................................2
Access Codes ..................................................................10
Length ........................................................................10
Programming ...............................................................43
Account Numbers ............................................................30
Ademco Contact ID ..........................................................31
Ademco Contact ID Options ............................................31
Ademco Express ..............................................................31
Adjust Clock .....................................................................36
Alarm Memory Display .....................................................46
Alarm Options ..................................................................25
Alarm Relay .......................................................................4
Options .......................................................................35
Alarm Report Code Transmission, Delay ........................17
Alarm Types .....................................................................16
Alternate Dial Option ........................................................33
Answer Upload/Download Software ................................38
Answer WinLoad Software ..............................................41
Answering Machine Override ...........................................40
Arming and Disarming Options ........................................22
Arming Report Codes ......................................................28
Auto Event Buffer Transmission ......................................41
Auto Force Arming ...........................................................23
Auto Test Report ..............................................................33
Auto Zone Shutdown .......................................................16
Counter .......................................................................16
Report Code ................................................................29
Auto-Arming
On No Movement .........................................................23
Options .......................................................................24
Timer ..........................................................................23
Timing .........................................................................23
Auxiliary Panic Report Code ............................................29
Auxiliary Power ..................................................................4
Auxiliary Supply Report Code ..........................................29
B
Backlight, Keypad ............................................................46
Backup Battery ..................................................................2
Battery Charge Current ....................................................36
Battery Failure Report Code ............................................29
Battery, Backup .................................................................2
Beep On Exit Delay .........................................................24
Beep On Trouble .............................................................37
Bell Cut-Off Timer ............................................................25
Bell on Communication Failure ........................................32
Bell Output
Connection ....................................................................4
Disconnected Report Code ...........................................29
Overload Report Code ..................................................29
Bell Squawk On Arm/Disarm
With Keypad ................................................................24
With Remote Control ....................................................24
Burglary Zones, 24 Hr. .....................................................14
Buzzer Zone ....................................................................14
Bypass Options, Supervision ...........................................39
Bypass Programming ......................................................44
Bypass Recall Feature .....................................................45
Bypass Zones ..................................................................16
C
Call Back Feature ............................................................41
Call Upload/Download Software ......................................38
Call WinLoad Software ....................................................40
Cancel Auto-Arm Report Code ........................................28
Cancel Communication ....................................................38
Charge Current ................................................................36
Check-in Supervision .......................................................19
Chime Zones ...................................................................46
Clock Adjust .....................................................................36
Closing Delinquency ........................................................33
Report Code ................................................................28
Cold Start Report Code ...................................................30
Configuring The LED Keypads ..........................................8
Connecting
Bells or Sirens ...............................................................4
Fire Zones .....................................................................6
Keypad Zones ...............................................................5
Keypads ........................................................................5
Keyswitches ..................................................................6
PGMs ...........................................................................4
Single Zone Inputs .........................................................5
Telephone Lines ............................................................4
Contact ID Options ..........................................................31
Counter, Auto Zone Shutdown ........................................16
Current Consumption Table ...............................................4
D
Data Display Mode ............................................................7
Delay
Before Alarm Report Code Transmission ........................17
Between Dialing Attempts .............................................33
Dial Tone ....................................................................32
Pager Report ...............................................................32
Power Failure Report ....................................................33
Delayed Fire Zone ...........................................................15
Dial Tone Delay ...............................................................32
Dialer settings ..................................................................27
Dialing Attempts ...............................................................33
Dialing Method .................................................................32
Disarm Reporting Options ...............................................33
Disarming .........................................................................43
Duress Code ....................................................................11
Duress Report Code ........................................................29