Installation Instructions
Table Of Contents
- Part 1: Introduction
- Part 2: Installation
- Part 3: Programming Methods
- Part 4: Access Codes
- Part 5: Zone Programming
- Part 6: Wireless Features
- Part 7: Arming and Disarming Options
- 7.1 Switch To Stay Arming
- 7.2 Stay Arming with Delay
- 7.3 Regular Arming Switches to Force Arming (Not to be used with UL Installations)
- 7.4 Restrict Arming on Battery Fail
- 7.5 Restrict Arming on Tamper Failure
- 7.6 Timed Auto-Arming
- 7.7 No Movement Auto-Arming
- 7.8 Auto-Arming Options (Not to be used with UL installations)
- 7.9 One-Touch Arming (Not to be used with UL installations)
- 7.10 Exit Delay
- 7.11 Bell Squawk On Arm/Disarm with Keypad
- 7.12 Bell Squawk On Arm/Disarm with Remote Control
- 7.13 No Exit Delay When Arming with Remote Control
- 7.14 No Exit Delay Beeps and No Bell Squawk When Stay Arming
- Part 8: Alarm Options
- Part 9: Reporting and Dialer settings
- 9.1 Reporting/Dialer (Enable/Disable)
- 9.2 Report Codes
- 9.2.1 Arming Report Codes
- 9.2.2 Special Arming Report Codes
- 9.2.3 Disarming Report Codes
- 9.2.4 Special Disarming Report Codes
- 9.2.5 Zone Alarm Report Codes
- 9.2.6 Zone Alarm Restore Report Codes
- 9.2.7 Special Alarm Report Codes
- 9.2.8 Zone Tamper Report Codes
- 9.2.9 Zone Tamper Restore Report Codes
- 9.2.10 System Trouble Report Codes
- 9.2.11 System Trouble Restore Codes
- 9.2.12 Special Reporting Codes
- 9.3 Monitoring Station Telephone Numbers
- 9.4 Partition Account Numbers
- 9.5 Reporting Formats
- 9.6 Pager Delay
- 9.7 Event Call Direction
- 9.8 Dialing Method
- 9.9 Pulse Ratio
- 9.10 Bell on Communication Failure
- 9.11 Dial Tone Delay
- 9.12 Maximum Dialing Attempts
- 9.13 Delay Between Dialing Attempts
- 9.14 Alternate Dial Option
- 9.15 Recent Close Delay
- 9.16 Auto Test Report
- 9.17 Closing Delinquency Timer
- 9.18 Power Failure Report Delay
- 9.19 Disarm Reporting Options
- 9.20 Zone Restore Report Options
- 9.21 Telephone Line Monitoring (TLM)
- Part 10: Programmable Outputs
- Part 11: System Settings
- 11.1 Hardware Reset
- 11.2 Installer Lock
- 11.3 Keypad Lockout Feature
- 11.4 Battery Charge Current
- 11.5 Partitioning
- 11.6 System Real-Time Clock
- 11.7 Clock Adjust
- 11.8 Keypad Tamper Supervision
- 11.9 Keypad Audible Trouble Warning
- 11.10 Confidential Mode
- 11.11 Installer Quick Functions Keys
- 11.12 PGM Modules Supervision
- 11.13 Printer Module Supervision
- 11.14 Zone Expansion Bus Module Supervision
- 11.15 Wireless Transmitter Low Battery Supervision
- 11.16 Wireless Transmitter Supervision Options
- 11.17 Reprogram All Expansion Modules
- Part 12: Settings for WinLoad Software
- Part 13: User Operation
- 13.1 Trouble Display
- 13.2 Programming Access Codes
- 13.3 Disarming & Deactivating an Alarm
- 13.4 Regular Arming
- 13.5 Stay Arming
- 13.6 Instant Arming
- 13.7 Force Arming (Not to be used with UL Installations)
- 13.8 Manual Bypass Programming
- 13.9 One-Touch Arming
- 13.10 Keyswitch Arming
- 13.11 Panic Alarms
- 13.12 Auto-Arming (Not to be used with UL installations)
- 13.13 Alarm Memory Display
- 13.14 Programming Chime Zones
- 13.15 Keypad Muting (Not to be used with UL installations)
- 13.16 Keypad Backlight (1686H and 1686V only)
- FCC Warnings
- Index
Spectra Series 51
Partial Arming Report Code .............................................28
Partition Account Numbers ..............................................30
Partition Assignment, Zone ..............................................15
Partitioning .......................................................................36
PC Exit Report Code .......................................................30
PC Password ...................................................................40
PC Telephone Number ....................................................40
PGM (Control Panel)
Activation Event ...........................................................34
Deactivation Event .......................................................35
PGM Delay ..................................................................35
Strobe Options .............................................................35
PGM Activation, User Code Option .................................11
Power .................................................................................2
Power Failure Report Delay .............................................33
Printer Fault Report Code ................................................29
Programmable Output Connections ..................................4
Programmable Outputs ....................................................34
Programming
Access Codes ..............................................................43
Chime Zones ...............................................................46
Methods ........................................................................7
Using a Keypad .............................................................7
Wireless Features ........................................................18
Wireless Fire Zone .......................................................15
Pulse Ratio ......................................................................32
Q
Quick Arming ...................................................................24
Quick Functions Keys (Installer) ......................................38
R
Real-Time Clock ..............................................................36
Reassign Zones to Expansion Inputs ..............................13
Recall Bypass ..................................................................45
Recent Close Delay .........................................................33
Recent Closing Report Code ...........................................29
Recycle Alarm ..................................................................25
Regular Arming ................................................................44
Regular Arming Switches to Force Arming ......................23
Remote Arming Report Code ..........................................28
Remote Controls
Assigning to 1759EX ....................................................20
Assigning to User Access Codes ...................................21
Deleting ......................................................................20
Programming ...............................................................20
Programming Remote Control Buttons ...........................21
Remote Disarm Report Code ..........................................28
Report Code, Special
Cold Start ....................................................................30
Installer In ...................................................................30
Installer Out .................................................................30
PC Exit ........................................................................30
Test Report .................................................................30
Tx Supervision Loss .....................................................30
Tx Supervision Restore .................................................30
Report Code, Special Alarm
Auto Zone Shutdown ....................................................29
Auxiliary Panic .............................................................29
Duress ........................................................................29
Emergency Panic .........................................................29
Fire Panic ....................................................................29
Keypad Lockout ...........................................................29
Recent Closing ............................................................29
Report Code, Special Arming
Closing Delinquency .....................................................28
Keyswitch Arming .........................................................28
Late to Close ...............................................................28
No Movement ..............................................................28
One-Touch Arming .......................................................28
Partial Arming ..............................................................28
Remote Arming ............................................................28
Timed Auto-Arming ......................................................28
Report Code, Special Disarming
Cancel Auto-Arm ..........................................................28
Keyswitch Disarming ....................................................28
Remote Disarm ............................................................28
Report Code, System Trouble
AC Failure ...................................................................29
Auxiliary Supply ...........................................................29
Battery Failure .............................................................29
Bell Output Disconnected ..............................................29
Bell Output Overload ....................................................29
Fail to Communicate .....................................................29
Fire Loop Trouble .........................................................29
Module Fault ................................................................29
Printer Fault .................................................................29
Timer Loss ..................................................................29
Wireless Low Battery ....................................................29
Report Codes ...................................................................28
Reporting and Dialer settings ..........................................27
Reporting Formats ...........................................................30
Re-Program All Expansion Modules ................................39
Reset, Hardware ..............................................................36
Restrict Arming
On Battery Fail .............................................................23
On Supervision Loss ....................................................39
On Tamper Trouble ......................................................23
Rings ................................................................................40
S
Single Zone Inputs .............................................................5
Software, Upload/Download ..............................................7
Special Alarm Report Codes ...........................................29
Special Arming Report Codes .........................................28
Special Disarming Report Codes .....................................28
Special Reporting Codes .................................................30
Standard 24Hr. Fire Zone ................................................15
Stay
Arming ........................................................................44
Delay ..........................................................................22
Zones .........................................................................16
Strobe Options .................................................................35
Supervision Bypass Options ............................................39
Supervision Options, Wireless Transmitter ......................39
Switch to Stay Arming ......................................................22
System
Master Code ................................................................10
Real-Time Clock ..........................................................36
Settings .......................................................................36
Trouble Report Codes ..................................................29