Programming Guide
Table Of Contents
- Default Installer Code
- Default System Master Code
- How Do I Enter Programming Mode?
- Decimal and Hexadecimal Programming Table
- Trouble Display
- Data Display Mode (LED Keypads Only)
- Configuring the 1686H, 1686V and 1689 Keypads (V2.0 or higher)
- Zone Programming
- System Timers
- Programmable Outputs
- System Options
- Communication Settings
- Report Codes
- System Settings
- User Code Options
- Reprogram All Modules
- Paradox Memory Key (PMC-3)
- 4-PGM Output Modules V2.0
- Printer Module V2.0
- Voice-assisted Arm/Disarm Bus Module V2.0
- Wireless Features
- Zone Expansion Bus Modules
- User Operation
- Appendix A - Ademco CID Report Code List (Prog.)
- Appendix B - Ademco CID Report Code List (All Codes)
- Bus Module Connections
- Hardware Connections
Spectra 1759MG - 17 - Programming Guide
Alarm Report Codes
Alarm Restore Special
[187]___/___Zone 01
___/___Zone 02
___/___Zone 03
___/___Zone 04
[191]___/___Zone 01
___/___Zone 02
___/___Zone 03
___/___Zone 04
[195]___/___Emergency Panic
___/___Auxiliary Panic
___/___Fire Panic
___/___Recent Closing
[188]___/___Zone 05
___/___Zone 06
___/___Zone 07
___/___Zone 08
[192]___/___Zone 05
___/___Zone 06
___/___Zone 07
___/___Zone 08
[196]___/___Zone Shutdown
___/___Duress
___/___Keypad Lockout
___/___N/A
[189]___/___Zone 09
___/___Zone 10
___/___Zone 11
___/___Zone 12
[193]___/___Zone 09
___/___Zone 10
___/___Zone 11
___/___Zone 12
[190]___/___Zone 13
___/___Zone 14
___/___Zone 15
___/___N/A
[194]___/___Zone 13
___/___Zone 14
___/___Zone 15
___/___N/A
Tamper Report Codes
[197]
Trouble
___/___Zone 01
___/___Zone 02
___/___Zone 03
___/___Zone 04
[200]___/___Zone 13
___/___Zone 14
___/___Zone 15
___/___N/A
[203]___/___Zone 09
___/___Zone 10
___/___Zone 11
___/___Zone 12
[198]___/___Zone 05
___/___Zone 06
___/___Zone 07
___/___Zone 08
[201]
Restore
___/___Zone 01
___/___Zone 02
___/___Zone 03
___/___Zone 04
[204]___/___Zone 13
___/___Zone 14
___/___Zone 15
___/___N/A
[199]___/___Zone 09
___/___Zone 10
___/___Zone 11
___/___Zone 12
[202]___/___Zone 05
___/___Zone 06
___/___Zone 07
___/___Zone 08
System Trouble Report Codes
System Trouble Restore Special
[205]___/___N/A
___/___AC Failure
___/___Battery Failure
___/___Auxiliary Supply
[208]___/___TLM
___/___AC Failure
___/___Battery Failure
___/___Auxiliary Supply
[211]___/___Cold Start (Shutdown)
___/___Test Report
___/___N/A
___/___PC Exit
[206]___/___Bell Output Overload
___/___Bell Output Disconnect
___/___Timer Loss
___/___Fire Loop Trouble
[209]___/___Bell Output Overload
___/___Bell Output Disconnect
___/___Timer Loss
___/___Fire Loop Trouble
[212]___/___Installer In
___/___Installer Out
___/___N/A
___/___N/A
[207]___/___Wireless Low Battery
___/___Module Fault
___/___Printer Fault
___/___Fail to Communicate
[210]___/___Wireless Low Battery
___/___Module Fault
___/___Printer Fault
___/___Fail to Communicate
[213]___/___TX Supervision Loss
___/___TX Supervision Restore
___/___N/A
___/___N/A