Installation Guide
Table Of Contents
- Introduction
- About Magellan and this Manual
- Conventions
- Specifications
- Quick Setup
- Installation
- AC Power
- Backup Battery Pack
- Telephone Line Connections
- Programmable Outputs (PGMs)
- Hardwire Zone Connections
- WinLoad Connection
- UIP-256 Universal In-Field Programmer Connection
- X10 Transmitter Connection
- Connecting a Paradox Memory Key (PMC-3)
- Location and Mounting
- Connecting the Radio Antenna
- Programming Methods
- WinLoad Installer Upload/Download Software
- Programming Using the Built-in Keypad
- Programming Using a Paradox Memory Key
- User Codes
- User Code Length
- Installer Code
- Maintenance Code
- System Master Code
- Duress Code
- Zone Programming
- Zone Programming Overview
- Zone Definitions
- Zone Options
- Zones 15 and 16 become Hardwire Zones
- EOL (End-Of-Line) Zones
- Wireless Programming
- Assigning Wireless Zone Transmitters
- Assigning Wireless Doorbells to the Console
- Deleting Assigned Wireless Transmitters
- Viewing Wireless Transmitter Signal Strength
- Assigning Remote Controls
- Programming the Remote Control’s Buttons
- Arming and Disarming
- Regular Arming Switches to Stay Arming
- Regular Arming Switches to Force Arming
- Stay Arming Switches to Force Arming
- Timed Auto-Arming
- No Movement Auto-Arming
- Auto-Arming Options
- One-Touch Arming
- Exit Delay
- Bell Squawk on Arm/Disarm with Remote Control
- No Exit Delay when Arming with Remote Control
- Exit Delay Termination
- Follow Zone Switches to Entry Delay 2
- Closing Delinquency Timer
- Alarm Options
- Bell Cut-off Timer
- Wireless Transmitter Supervision Options
- Tamper Recognition Options
- Check-in Supervision Options
- Panic Alarms
- Reporting and Dialer Settings
- Report Codes
- Console Telephone Numbers
- Console Account Number
- Reporting Formats
- Event Call Direction
- Delay Between Dialing Attempts
- Alternate Dial Option
- Force Dial Option
- Dialing Method
- Pulse Ratio
- Switch to Pulse Dialing on 5th Attempt
- Telephone Line Monitoring (TLM)
- Recent Close Delay
- Auto-Test Report
- Power Failure Report Delay
- Disarm Reporting Options
- Zone Restore Report Options
- Programmable Outputs
- PGM Activation Event
- PGM Deactivation Event
- PGM Delay
- PGM Normal State
- PGM X10 Option
- System Settings
- Software Reset
- Installer Lock
- Console Tamper Supervision
- Console Audible Trouble Warning
- FM Tuner Option
- Daylight Savings Time
- AC Power Failure Warning
- The Trouble Display
- WinLoad Software Settings
- Panel Answer Options
- Panel Identifier
- PC Password
- PC Telephone Number
- Call Back Feature
- Appendix 1: Ademco Contact ID Report Code List
- Index
40 Reference & Installation Manual
Special disarming
......................................................24
System trouble
..........................................................25
System trouble restore
...............................................25
Test
.........................................................................29
Zone alarm
...............................................................24
Zone alarm restore
....................................................24
Zone tamper
.............................................................25
Zone tamper restore
..................................................25
Report formats
Ademco Contact ID format
..........................................27
Ademco slow format
..................................................27
SESCOA format
........................................................27
SIA FSK format
.........................................................27
Silent Knight fast format
.............................................27
Standard Pulse format
...............................................27
Reporting & Dialer Settings
Account number
........................................................26
Alternate dial options
.................................................28
Auto-test report
.........................................................29
Console telephone numbers
.......................................25
Delay between dialing attempts
...................................27
Dialing method
..........................................................28
Disarm report options
.................................................29
Event call direction
....................................................27
Force Dial Option
......................................................28
Power Failure report delay
..........................................29
Pulse ratio
................................................................28
Recent Close Delay
...................................................28
Report Codes
............................................................24
Reporting formats
......................................................27
Switch to Pulse dialing
...............................................28
TLM
.........................................................................28
Zone Restore Report options
......................................29
Reset software
..............................................................31
Reset system master code
............................................12
S
Service telephone number
............................................26
SESCOA
.......................................................................27
Shutdown, Auto-zone
....................................................15
SIA FSK
........................................................................27
Silent Knight Fast
..........................................................27
Single digit data entry method
.......................................11
Software reset
...............................................................31
Special alarm report codes
...........................................24
Special arming report codes
.........................................24
Special disarming report codes
.....................................24
Special keys for telephone nos.
....................................26
Special report codes
.....................................................25
Standard 24Hr. Fire Zones
............................................14
Stay arming switches to Force arming
..........................20
Stay zone types
Follow/Stay Zones
.....................................................14
Instant/Stay Zones
.....................................................14
Supervision
Check-in
...................................................................22
Console tamper
.........................................................31
Wireless transmitters
.................................................22
Supervision Bypass options
..........................................22
Switch to Pulse dialing
..................................................28
System master code
.....................................................12
System master code lock
..............................................12
System master code reset
.............................................12
System settings
AC power failure warning
............................................31
Console audible trouble warning
..................................31
Console tamper supervision
........................................31
Daylight savings time
.................................................31
FM tuner option
.........................................................31
Installer lock
..............................................................31
Software reset
...........................................................31
System trouble report codes
.........................................25
System trouble restore report codes
.............................25
T
Tamper Bypass options
.................................................22
Tamper Recognition options
.........................................22
Tamper supervision, console
........................................31
Telephone line connection
Direct connect
.............................................................6
Line plug connect
........................................................7
Telephone Line Monitoring (TLM)
.................................28
Telephone numbers
......................................................25
Central station
...........................................................26
Pager
.......................................................................26
PC
...........................................................................33
Service
.....................................................................26
Voice Message
..........................................................26
Test report code
............................................................29
Test Report, Automatic
..................................................29
Timed Auto-arming
........................................................20
Timers
Alarm Transmission
...................................................16
Auto-arm
...................................................................20
Auto-zone Shutdown
..................................................15
Bell Cut-off
................................................................22
Check-in Supervision
.................................................23
Closing Delinquency
..................................................21
Delay between dialing attempts
...................................27
Entry Delay 1
............................................................13
Entry Delay 2
............................................................13
Exit delay
..................................................................21
Intellizone
.................................................................16
No Movement
............................................................20
PGM delay
................................................................30
Power failure report delay
...........................................29
Recent close
.............................................................28
TLM fail
....................................................................28
TLM fail timer
.................................................................28
Tones, doorbell
..............................................................17
Transmitter supervision options
....................................22
Trouble display
..............................................................31
Trouble, audible warning
...............................................31
U
User codes
Duress code
..............................................................12
Installer code
.............................................................12
Maintenance code
.....................................................12
System master code
..................................................12
User code length
.......................................................12