User's Guide

26 User Guide
Retrieving Radio Stations from Memory
To retrieve a radio station saved in memory:
Accessing the Radio by Remote Control
By default, your remote control is programmed to turn ON or OFF Magellan’s radio and to scroll through the radio stations saved in
memory.
• The button on your remote control turns ON or OFF the radio. Press the button once to turn ON the radio and then press the
button again to turn OFF the radio.
• The button on your remote control scrolls through the radio stations saved in memory. Everytime you press the button, the
Magellan will scroll to the next radio station saved in memory.
Alarm Clock
You can also use the Magellan console as an alarm clock. At the programmed time, Magellan will begin to play a selected tone or
activate the radio. When the alarm clock is enabled, the alarm clock symbol (Figure 5 below) will appear in the upper left corner of the
LCD screen.
Figure 5: Alarm Clock Symbol
Press the desired key
from the center keypad
that corresponds to the
desired memory location.
to
Alarm clock
symbol