User's Guide

Advanced Features 41
Utility Reporting
Customize what events and when these events will be reported to you by using the Utility Reporting menu. Program from one to four
report types to have the Magellan console call you when certain conditions are met. With this feature programmed, Magellan will call up
to two separate telephone numbers and play a personalized pre-recorded voice message. After receiving the message, press the [#] key
on the telephone to acknowledge that you received the message which will in turn end the message. Press the [1] key on the telephone
to use the speakerphone feature and to talk through the Magellan console. To program the Utility Reporting feature:
Report Types
There are four report types that can be used with Utility reporting:
• Disarm with user: Use this report type to program the Magellan console to call you when specific users disarm the system. After
entering the menu, select the desired user(s) that you wish reported. This feature is useful when you wish to know when specific
people disarm the system.
For example, you can program Magellan to call you whenever your children disarm your system thus informing you that they
have arrived home.
• System troubles: Use this report type to have the Magellan console call you when specific troubles occur. After entering the
menu, select the desired trouble(s) you wish to be notified about. This feature can be used to inform you of a power failure.
• Paramedic alarm: Use this report type to have the Magellan console call you when specific users require emergency assistance.
When the programmed users presses the appropriate key on their remote controls (see Remote Controls on page 8), the
Menu
Master user
Press until
desired
telephone #
and then
press ok
next OK
Press until
Record
Alrm Mes?
screen
OK
Record
your alarm
message
Enter
desired
telephone #
and then
press ok
next next
Press until
Utility
Reporting
screen and
then press
ok
Press until
desired report
type and then
press ok.
See Report
Types below
for more info.
next