User's Guide

Advanced Features 43
Pager Reporting
Transmit personalized numerical messages from the Magellan console to a pager using this communicator format. To program the
Magellan console with this communicator setting:
Bell Cut-Off Timer
After an audible alarm, Magellan’s built-in siren will stop upon disarming of the system or when the Bell Cut-off timer has elapsed,
whichever comes first. To program the Bell Cut-off timer:
System Test
Use this menu to test your Magellan system. This menu will initiate tests for Magellan’s assigned zones, remote controls, reporting
feature as well as some of Magellan’s hardware (lights, speaker and siren). This menu will also display any troubles that the system may
be experiencing. Use the [NEXT] action key to scroll through the available system tests and then press the [OK] action key to access the
desired test. Simply follow the on-screen instructions to perform the test. To access the System Test menu:
Master code
Enter desired
numerical message
Enter desired
pager #
menu next ok ok ok ok oknext
Master code Enter delay
time in minutes
menu next next next ok ok
Master code
oknextmenu
Press until
desired test
WARNING! When testing the hardware, the speaker and sirens will also be
tested. Do not be in close proximity to the Magellan console when performing
the hardware test to avoid any damage to your hearing.