User's Manual

8 User Guide
Magellan’s Keypads
Use this keypad to enter User
codes, required data and/or to
select desired menus.
Main Keypad Center Keypad
Use keys [1] to [16] on the center keypad for the following:
Zones 1 to 32
OFF = Zone closed (ok)
ON = Zone opened
Flashing = The zone has been tampered
Fast Flashing = Zone is in alarm
Press once = Listen to zone’s label (e.g.: “Front door”) and status
Users 1 to 16
When programming a user:
OFF = User not programmed
ON = User programmed
Press once = Listen to user label and program or edit a user
X10 programming (MG-6160 only)
This keypad is also used when programming and using
Magellan’s X10 features. Refer to Magellan’s X10 Instruction
Guide which can be downloaded for free from our website at
paradox.com.
Phone Key
Press once = Make a telephone call or answer an incoming call.
Press again to hang up. See page 21.
Fast flashing = Speakerphone in use. See page 21.
Volume Keys
Increase/decrease system volume.
17-32 Key
Off = Viewing zones 1 to 16
On =
Viewing zones 1 to 16,
and a zone above 16 is open
Flashing = Viewing zones 17 to 32
Press to toggle zone view (1-16 or 17-32)
Zone 1-16 display has priority over 17-32. If the center keypad is in 1-16
mode and an alarm occurs in 17-32, the display will switch to 17-32.
However if a zone opens in 1-16, the display will switch back to 1-16.