User's Manual

12 User Guide
Disarming
When your system is disarmed, it deactivates any alarms in progress and it deactivates the zones so an alarm will not be triggered if
zones are breached.
Entry Delay Timer
Your installer will program designated entry points (i.e., the front door) with an Entry Delay timer. This delay gives you time to enter
the armed premises and enter your User code to disarm your system before the alarm is triggered. Up to two Entry Delay Timers can
be programmed in your Magellan console.
Please note that UL installations require a maximum entry delay of 45 seconds.
Programming the Entry Delay Timer
Program the Entry Delay Timer with a value that will give you ample time to disarm your system before the alarm is triggered.
Only the System Master user can program the Entry Delay Timer. To program the timer:
Disarming an Armed System
When an entry point, like the front door, is opened, Magellan will
produce a sound indicating that the system has started the Entry
Delay timer (page 12). If a valid User code is entered before the
Entry Delay timer elapses, your system will disarm and will not
generate an alarm. To disarm an armed system:
Entry Delay
from 001 to
255 seconds
Press
until
desired
tone
Press to
program
Entry
Delay 2
menu ok ok next ok ok
System
Master code
Enter
designated
entry point
User code