User's Manual

20 User Guide
Accessing the Radio by Remote Control
By default, your remote control is programmed to manage Magellan’s radio in the following ways:
• The / button on your remote control turns the radio ON/OFF. Press the button once to turn the radio ON and then press the
button again to turn the radio OFF.
• The / button on your remote control scrolls through the radio stations saved in memory. Every time you press the button,
Magellan will scroll to the next radio station saved in memory.
• The button on your remote control adjusts the volume of the radio when the radio is already on and the system is disarmed.
The volume of the radio will gradually increase to its highest possible volume and then decrease to its lowest possible volume.
Alarm Clock
You can also use the Magellan console as an alarm clock. At the
programmed time, Magellan will begin to play a selected tone or activate
the radio*. When the alarm clock is enabled, the alarm clock symbol
(Figure 5) will appear in the upper left corner of the LCD screen.
* Available with the MG-6160 only.
Setting the Alarm Clock Time
Using the Alarm Clock Feature
After programming the alarm clock, the feature will be enabled and Magellan will play the selected tone at the programmed time.
Please note the following:
Alarm clock
symbol
Figure 5: Alarm Clock Symbol
Program
time
Press
until desired
tone
menu next okok