User's Manual

Advanced Features 27
Chapter 5: Advanced Features
This chapter pertains to features and functions that only the System Master user can access.
This chapter covers User code programming, such as programming new users into the system. This chapter also covers some zone
features as well as instructions on how to customize Magellan to suit your needs.
Programming User Codes
User codes allow access to the system. Magellan supports up to 16 User codes where:
• Every user from 002 to 016 is assigned a User code (user 001 is the System Master).
• Your installer can program User codes to be four or six digits in length.
• Each digit can be any value from 0 to 9.
To create or modify a user:
System Master Code (default: 1234)
The System Master code will give you access to all of the features available on your system as well as the ability to add, modify, or
delete any users.
Press
until
desired
user
Enter new
User
Confirm
new User
Modify
label?
Remote
control?
No
Yes
No
Yes
Another
user
Record
label
Press
button
menu next ok no/yes
System
Master code