User's Manual

Advanced Features 29
Deleting a Remote Control
To delete a remote control that is already programmed in the Magellan system:
Setting the Language
By default, Magellan is set to English. To change the language:
Voice Reporting
Use the Magellan console to call you (or someone you choose) on up to five different telephone numbers and play a personalized voice
message (maximum 20 seconds in length) to announce that an alarm has occurred. When in alarm, the system calls to play the pre-
recorded message, lists all zones in alarm, and guides you via a menu where you can perform actions including disarming the system.
After receiving the message, press the [#] key on the telephone twice to acknowledge and end the message. The unit will call three times
(switching between both numbers) or until someone acknowledges the message. To program the Magellan console for voice reporting:
Example: You programmed Magellan’s Voice Reporting feature to call your cellular phone and play your recorded message, “There is an alarm occurring
at home.” Therefore, whenever an alarm occurs, Magellan will call you on your cellular phone and you will hear “There is an alarm occurring at home”.
Press the [#] key on your cellular phone to acknowledge the message.
Press
until
desired
user
menu next ok
System
Master code
Modify
label?
Delete
remote?
No Yes
Another
user
no/yes
ok
next
yes
Press
until desired
language
menu next ok
System
Master code
Press
until
desired
telephone #
Press
until Record
Alrm Mes?
screen
Record
your alarm
message
Enter
desired
telephone #
menu ok next ok ok next ok
System
Master code