User's Manual

Overview 7
LCD Screen
Remote Controls
Alarm clock feature enabled (see page 20).
Instructions and/or messages appear in
this line
The function or action associated with
the action key directly underneath the
text appear in this line. Press the
appropriate action key to access the
function.
Information symbol. This means:
• There is a trouble in the system
(see page 23).
• There is an alarm in memory
(see page 13).
• Zones or a zone is currently
bypassed (see page 10).
Remote Control Default Settings
Your installer can add other functions and/or change the default settings of your remote
controls. To use the functions programmed in your remote control, press and hold the desired
key(s) for at least two seconds. Your remote control has already been programmed with the
following features:
MG-REM1
MG-REM2
= Force Arm (page 10)
= Disarm (page 12) / Control radio volume
(page 20)
= Turn FM radio ON/OFF* (page 19)†
= Scroll through programmed radio
stations in memory* (page 19)†
= Request feedback from the Magellan
system (see MG-REM2 Reference &
Installation Manual for more information)‡
= Turn FM radio ON/OFF* (page 19)‡
= Scroll through programmed radio
stations in memory* (page 19)‡
† = MG-REM1 only
* Available with the MG-6160 only
‡ = MG-REM2 only