User's Manual

10 Programming Guide
Communicator Settings
* Using Magellan’s speakerphone feature (MG-6160 only), the Service telephone number allows the user to directly call the installer or maintenance staff if any problems arise.
† If you are using any report format other than SIA in sections [105] and [106] and you would like to transmit an “A”, press [0] on the main keypad; if you would like to enter a
space (non-reportable digit), press the [1] key on the center keypad.
Table 1: Special Keys for Telephone Numbers
There are five personal telephone numbers used for voice reporting. These telephone numbers are programmed through the
console’s communicator menu.
()
Section Data Description
[105]
____/____/____
Report format for monitoring station telephone number 1 ( )
[106]
____/____/____
Report format for monitoring station telephone number 2 ( )
[107]
____/____/____/____
Account number ( ) †
[108]
____/____/____/____
Panel identifier (for use with WinLoad software) ( )
[109]
____/____/____/____
Panel password (for use with WinLoad software) ( )
[110]
Reserved for future use
[111]
Monitoring station telephone number 1 (32 digits maximum; if less than 32, press [ok] to accept)
()
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[112]
Monitoring station telephone number 2 (32 digits maximum; if less than 32, press [ok] to accept)
()
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[113]
Pager Telephone # (32 digits maximum; if less than 32, press [ok] to accept)
()
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[114]
Numeric message sent with Pager Reporting (32 digits maximum; if less than 32, press [ok] to accept)
()
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[115]
PC telephone number for WinLoad (32 digits maximum; if less than 32, press [ok] to accept)
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
[116]
Service telephone number* (32 digits maximum; if less than 32, press [ok] to accept)
() (MG-6160 only)
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___
Keys to press Action or Value
[*] *
[#] #
Center [
ACTION] (pause) key
Add a 4-second pause to the telephone number. Press the key and a “P” will be inserted into the telephone number
J[4] J[3]
J[4] J[3]
001 = Ademco slow (1400Hz 10BPS) 002 = Silent Knight (1400Hz 20BPS) 003 = SESCOA (2300Hz 20BPS)
004 = Ademco Contact ID (default) 005 = SIA FSK 006 = ADEMCO Express (DTMF 4+2)
J[4] J[3]
J[4] J[9]
J[4] J[9]
J[4] J[3]
J[4] J[3]
J[4] J[3]
J[4] J[3]
J[4] J[3]
J[4] J[3]