User's Manual

14 Programming Guide
Wireless Output Assignment
Wireless output assignment may be done through the console’s menu (). Alternatively, assign the PGM by entering its serial
number in the corresponding section:
Wireless Keypad Assignment
Wireless keypad assignment may be done through the console’s menu (). Alternatively, assign the keypad by entering its serial
number in the corresponding section:
Wireless Repeater Assignment
Wireless repeater assignment may be done through the console’s menu (). Alternatively, assign the repeater by entering its
serial number in the corresponding section:
Wireless Programmable Output (PGM) Settings
Refer to Appendix 1: PGM Event Table on page 18 for the PGM events that can be used to program Magellan’s PGM outputs.
† 000 = No delay; 001 = 1s delay; 002 = 5s delay; 003 = 15s delay; 004 = 30s delay; 005 = 1min delay; 006 = 5min delay;
007 = 15min delay; 008 = 30min delay.
Wireless Supervision Options
Section Serial Number Section Serial Number
[235]
PGM1: ____/____/____/____/____/____
[237]
PGM3: ____/____/____/____/____/____
[236]
PGM2: ____/____/____/____/____/____
[238]
PGM4: ____/____/____/____/____/____
Section Serial Number Section Serial Number
[243]
Keypad 1: ____/____/____/____/____/____
[245]
Keypad 3: ____/____/____/____/____/____
[244]
Keypad 2: ____/____/____/____/____/____
[246]
Keypad 4: ____/____/____/____/____/____
Section Serial Number Section Serial Number
[247]
Repeater 1: ____/____/____/____/____/____
[248]
Repeater 2: ____/____/____/____/____/____
Section Description Event Group # Sub-group # Default
[260] Wireless PGM1 Activation Event (____/____) (____/____) No event programmed
[261] Wireless PGM1 Deactivation Event (____/____) (____/____) No event programmed
[262] Wireless PGM2 Activation Event (____/____) (____/____) No event programmed
[263] Wireless PGM2 Deactivation Event (____/____) (____/____) No event programmed
[264] Wireless PGM3 Activation Event (____/____) (____/____) No event programmed
[265] Wireless PGM3 Deactivation Event (____/____) (____/____) No event programmed
[266] Wireless PGM4 Activation Event (____/____) (____/____) No event programmed
[267] Wireless PGM4 Deactivation Event (____/____) (____/____) No event programmed
Section Data Description Default
[280] ____/____/____ (000 to 008) † Wireless PGM1 timer 000
[281] ____/____/____ (000 to 008) † Wireless PGM2 timer 000
[282] ____/____/____ (000 to 008) † Wireless PGM3 timer 000
[283] ____/____/____ (000 to 008) † Wireless PGM4 timer 000
[290] Wireless Transmitter Supervision Zone Options * Bold = Default setting
Option OFF ON
[1] Zone 1 supervision  Disabled  Enabled
[2] Zone 2 supervision  Disabled  Enabled
[3] Zone 3 supervision  Disabled  Enabled
[4] Zone 4 supervision  Disabled  Enabled
[5] Zone 5 supervision  Disabled  Enabled
[6] Zone 6 supervision  Disabled  Enabled
[7] Zone 7 supervision  Disabled  Enabled
[8] Zone 8 supervision  Disabled  Enabled
J[4] J[7]
J[4] J[8]
J[4] J[9]