Programming Guide
Remote Control Options
Keys (on/off)
[1]
[2
]
[3
]
[4
]
[5
]
[6
]
[7
]
[8
]
Section [17]
: User 1 ___ ___ ___ ___ ___ ___ ___ ___
Section [18]
: User 2 ___ ___ ___ ___ ___ ___ ___ ___
Section [19]
: User 3 ___ ___ ___ ___ ___ ___ ___ ___
Section [20]
: User 4 ___ ___ ___ ___ ___ ___ ___ ___
Section [21]
: User 5 ___ ___ ___ ___ ___ ___ ___ ___
Section [22]
: User 6 ___ ___ ___ ___ ___ ___ ___ ___
Section [23]
: User 7 ___ ___ ___ ___ ___ ___ ___ ___
Section [24]
: User 8 ___ ___ ___ ___ ___ ___ ___ ___
OFF Key On
[1] Set arming methods
[2
] see table on
[3
] next page
Disabled
[4
] * Button 1 PGM Enabled
Disabled
[5
] * Button 2 PGM Enabled
Disabled
[6
] * Button 3 PGM Enabled
Disabled
[7
] * Button 4 PGM Enabled
Disabled
[8
] * Panic Enabled (simultaneously
press buttons 1 and 2 to activate
a panic alarm)
= Button 1
= Button 2
References to button 3 & 4 refer to 4-button remote controls.
318/433MHz V1.10
PROGRAMMING CARD
Press “PROG” button + [ENTER] + [INSTALLER CODE] + [SECTION]
+
required data
+ [ENTER]
* = DEFAULT SETTING
Section Data Description
[00] __/__/__/__/__/__ Installer Code* (757575)
[01] __/__/__/__/__/__ User Access Code 1
[02] __/__/__/__/__/__ User Access Code 2
[03] __/__/__/__/__/__ User Access Code 3
[04] __/__/__/__/__/__ User Access Code 4
[05] __/__/__/__/__/__ User Access Code 5
[06] __/__/__/__/__/__ User Access Code 6
[07] __/__/__/__/__/__ User Access Code 7
[08] __/__/__/__/__/__ User Access Code 8
[09]
Press [ENTER] & button 1 twice to assign RC to User 1 l
[10]
Press [ENTER] & button 1 twice to assign RC to User 2 l
[11]
Press [ENTER] & button 1 twice to assign RC to User 3 l
[12]
Press [ENTER] & button 1 twice to assign RC to User 4 l
[13]
Press [ENTER] & button 1 twice to assign RC to User 5 l
[14]
Press [ENTER] & button 1 twice to assign RC to User 6 l
[15]
Press [ENTER] & button 1 twice to assign RC to User 7 l
[16]
Press [ENTER] & button 1 twice to assign RC to User 8 l
PARKEP-02
}