ACCULINK DSU / CSU Operator's Guide 3160-A3, 3161-B3, 3164-A2, 3165-A2

4. Maintenance
3160-A2-GB21-90 February 2001
4-37
Displaying DSU/CSU Test Status
Use the Test Status command to display the active tests for the DSU/CSU. Status
messages that can display on the front panel LCD are listed in Table 4-10, Test
Status Message.
Procedure
To display test status:
1. From the top-level menu screen, select Stat.
2. From the Status screen, press the key until the TStat selection appears on
the screen.
3. Select TStat.
The Test Status screen appears showing you what tests are active for the
DSU/CSU.
F1
F2
F3
Status:
STest Perf TStat