Network Device User's Guide
SNMP MIB Objects
E-23
3166-A2-GB20-10
November 1998
Table E-1. SNMP MIB to Front Panel Command Cross-Reference (2 of 4)
Front Panel Command SNMP MIB Object
Stat–>Tstat
LLB Test Active
PLB Test Active
RLB Test Active
DCLB on Port1
DTLB on Port1
1–8 Test Active
QRSS Test Active
QRSS on Port1
511 on Port1
Monitoring QRSS
Mon QRSS, Port1
Mon511, Port1
Read:
dsx1LineLoop
from
dsx1LoopbackConfig
for Net T1
dsx1PayloadLoop
from
dsx1LoopbackConfig
for Net T1
dsx1PayloadLoop
from
dsx1LoopbackConfig
for Port1
testFullDuplexLoopback
from
IfExtnsTestType
for Port1
testLoopDTLB
from
IfExtnsTestType
for Port 1
dsx1SendOtherTestPattern
from
dsx1SendCode
for Net T1
dsx1SendQRS
from
dsx1SendCode
for Net T1
testSendQRSS
from
IfExtnsTestType
for Port 1
testSend511
from
IfExtnsTestType
for Port
1
testMonQRSS
from
ifExtnsTestType
for Net T1
testMonQRSS
from
ifExtnsTestType
for Port 1
testMon511
from
ifExtnsTestType
for Port 1
Stat–>LED–>Prtn:
DTR
CTS
RTS
Read:
rs232InSigState
from
rs232InSigName == dtr
rs232outSigState
from
rs232OutSigName == ctr
rs232InSigState
from
rs232InSigName == rts
Stat–>ID:
Ser
Mod
SRev
HRevCCA1
HRevCCA2
Read the sysDescr object from the System Group
Test–>Rlpbk–>LLBUP Set dsx1SendCode to
dsx1SendLineCode
Test–>Rlpbk–>LLBDN Set dsx1SendCode to
dsx1SendResetCode
Test–>Rlpbk–>54UP–>Prt1 Set IfExtnsTestType for Port 1
to
testSendV54Up
Test–>Rlpbk–>54DN–>Prt1 Set IfExtnsTestType for Port 1
to
testSendV54Down
Test–>Rlpbk–>FT1UP–>Prt1 Set IfExtnsTestType for Port 1
to
testSendFT1UP
Test–>Rlpbk–>FT1DN–>Prt1 Set IfExtnsTestType for Port 1
to
testSendFT1Down
Test–>Lpbk–>LLB
Test–>Lpbk–>Abort–>LLB
Set dsx1LoopbackConfig for Net T1 to
dsx1LineLoop
Set dsx1LoopbackConfig for Net T1 to
dsx1NoLoop
Test–>Lpbk–>PLB
Test–>Lpbk–>Abort–>PLB
Set dsx1LoopbackConfig for Net T1 to
dsx1PayloadLoop
Set dsx1LoopbackConfig for Net T1 to
dsx1NoLoop
Test–>Lpbk–>RLB
Test–>Lpbk–>Abort–>RLB
Set dsx1LoopbackConfig for Port1 to
dsx1PayloadLoop
Set dsx1LoopbackConfig for Port1 to
dsx1NoLoop