Network Device User's Guide

SDCP Operation

3-24

3166-A2-GB20-10

November 1998

5. Select Mgmt.

Edit:

User Alarm Mgmt

6. From the Mgmt Config screen, select Gen.

Mgmt Config:

Gen Trap

7. Press F1 (Next) until the Com Link configuration option appears.

8. Press F2 (PPP) or F3 (SLIP).

Com Link:

Next PPP SLIP

Specifying the Community Name(s) and Access Type(s)

You have the capability of specifying up to two community names (community

name 1 and community name 2) to be used by external SNMP managers when

trying to access objects in the DSU/CSU’s MIB. Once you specify the community

name(s), you must then specify the type of access to the MIB that SNMP

managers in the community are permitted to have.

 Procedure

To specify the community name 1 and its access type:

1. From the top-level menu screen, select Cnfig.

2. Select the configuration option set to be copied into the Edit area by using the

appropriate Function key. Use the scroll keys, if necessary.

3. Select Edit.

4. From the Edit screen, press the

key until the Mgmt selection appears on

the screen.