- COMSPHERE MODEMS INSTALLATION AND OPERATION MANUAL 392xPLUS, 3920PLUS, 3921PLUS

COMSPHERE 392xPlus Modems

3-66 November 1996 3920-A2-GN31-30

To access the Call Setup branch from the Top-Level menu, make the following selections:

Leased:28.8

Call_Setup

Press the

key until Call_Setup appears. Select Call Setup.

Dial

For dial backup applications, Dial allows you to dial any telephone number stored in directory

locations 1–24. Any telephone number dialed using the DCP must already exist in a directory

location. Refer to Change Directory for information on storing telephone numbers in directory

locations.

For leased backup applications, Dial allows you to switch to the backup leased line. Any valid

non-empty directory location may be used. The remote modem cannot automatically answer the

simulated call. Use the Answer function of the remote modem in conjunction with the Dial

function to manually switch to the backup leased line.

To access Dial from the Call Setup branch, make the following selection:

Call Setup: >

Dial Disconnect

Select Dial to display the first directory telephone number.

DialDirectory:

Nxt 01:5551234

To view other directory locations, select Nxt.

DialDirectory:

Nxt 02:3219876

Once the directory location you want appears on the LCD, press the F2 or F3 key to dial the

number.