Hotwire DSL Router User's Guide

C. Traps and MIBs
6300-A2-GB20-10 November 2003
C-17
Configuration MIB
The supported groups used with the DSL Configuration MIB, pdn_Config.mib, are:
 Device Configuration Copy Group
 Trap Configuration Group
 Paradyne Device Configuration Time Group
 Traps
Table C-10. Device Configuration Copy Group Objects Table
Object Description Setting/Contents
devConfigAreaCopy
(devConfigArea1)
Use to configure the current configuration
to the factory defaults settings.
NOTE: ALL current configuration input is
purged when the DSL router is resets as a
result of this command. Data purged
includes:
– Interface IP addresses
– IP route table entries
– ARP cache entries
– NAT entries
– DHCP server entries
noOp (1) – always reads as this value
and represents:
factory1-to-active(8)
devConfigTrapEnable
(devConfigTrap1)
This object determines which trap types are
sent, represented by a bit map as a sum.
Allows multiple trap types to be enabled or
disabled simultaneously.
Bit positions:
1 – warmStart trap
2 – authenticationFailure trap
4 – enterpriseSpecific traps
8 – LinkUp trap
16 – LinkDown trap
devConfigTimeOfDay
(devConfigTime 1)
Displays the current time. —
cCN(7) Signifies a configuration change or a
software upgrade.
7 – Warning trap
cCNTrapEnable
(router 28)
Use to enable or disable the configuration
change trap.
1 – Disable trap
2 – Enable trap