Network Hardware User Manual

Configuration Options
A-27
8700-A2-GB20-00
April 2000
Table A-12. General SNMP Management Options
SNMP Management
Possible Settings: Enable, Disable
Default Setting: Enable
Enable or disables the SNMP management features.
Enable – Enables SNMP management capabilities.
Disable – Disables SNMP management capabilities.
Community Name 1
Possible Settings: [ASCII text field]
Default Text: Public
Identifies the name of the community allowed to access the unit’s MIB. The community
name must be supplied by an external SNMP manager when that manager attempts to
access an object in the MIB.
H This field does not appear if the unit is an LTU in a DSLAM running in IP
conservative mode.
Text Field – Enter or edit a community name.
Clear – Clears the community name field.
Name 1 Access
Possible Settings: Read, Read/Write
Default Setting: Read/Write
Determines the access level for Community Name 1.
H This field does not appear if the unit is an LTU in a DSLAM running in IP
conservative mode.
Read – Allows read-only access (get) for Community Name 1.
Read/Write – Allows read/write access (get) for Community Name 1.
Community Name 2
Possible Settings: [ASCII text field]
Default Text: [null string]
Identifies the name of the second community allowed to access the unit’s MIB. The
community name must be supplied by an external SNMP manager when that manager
attempts to access an object in the MIB.
H This field does not appear if the unit is an LTU in a DSLAM running in IP
conservative mode.
Text Field – Enter or edit a community name.
Clear – Clears the community name field.
Name 2 Access
Possible Settings: Read, Read/Write
Default Setting: Read
Determines the access level for Community Name 2.
H This field does not appear if the unit is an LTU in a DSLAM running in IP
conservative mode.
Read – Allows read-only access (get) for Community Name 2.
Read/Write – Allows read/write access (get/set) for Community Name 2.