Network Hardware User Manual

Monitoring and Troubleshooting
7-9
8700-A2-GB20-00
April 2000
Table 7-4. Device Messages (2 of 2)
Device Message What To DoWhat Message Indicates
Limit of six Login IDs
reached
An attempt to enter a new
login ID was made, and the
limit of six login/password
combinations has been
reached.
1. Delete another login/password
combination.
2. Re-enter the new login ID.
No Security Records
to Delete
Delete was selected from
the Administer Login
screen, and no security
records had been defined.
H No action needed.
H Enter a security record.
Password Matching
Error – Re-enter
Password
Password entered in the
Re-enter Password field of
the Administer Logins
screen does not match
what was entered in the
Password field.
H Try again.
H Contact your system
administrator to verify your
password.
Please Wait Command takes longer
than 5 seconds.
Wait until message clears.
Test Active A test is running and no
higher priority health and
status messages exist.
H Contact service provider if test
initiated by the network.
H Wait until the other test ends
and message clears.
H Cancel all tests from the Test
screen.
H Stop the test from the same
screen the test was started
from.