Router User's Guide
Table Of Contents
- Contents
- About This Guide
- 1. About the FrameSaver SLV
- 2. User Interface and Basic Operation
- 3. Configuration Procedures
- 4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
- Setting Up Auto-Configuration
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
- 5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
- Dynamic Host Configuration Protocol Server
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
- 6. Security and Logins
- 7. Operation and Maintenance
- 8. Troubleshooting
- 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- 10. Setting Up NetScout Manager Plus for FrameSaver Devices
- 11. Setting Up Network Health for FrameSaver Devices
- A. Menu Hierarchy
- B. SNMP MIBs and Traps, and RMON Alarm Defaults
- C. Router CLI Commands, Codes, and Designations
- D. Router Command Line Summaries and Shortcuts
- E. Connectors, Cables, and Pin Assignments
- F. Technical Specifications
- G. Equipment List
- Index
7. Operation and Maintenance
9128-A2-GB20-80 September 2002
7-79
Determining Whether a Download Is Completed
To see whether a download has completed, check the Identity screen.
Main Menu
→
Status
→
Identity
Check Alternate Software Rev. under the NAM Identity column.
If a software revision number appears, the file transfer is complete.
If
In Progress
appears, the file is still being transferred.
If
Invalid
appears, no download has occurred or the download was not
successful.
Changing Software
Once a software upgrade is downloaded, it needs to be activated. When activated,
the unit resets, then executes the downloaded software. With this feature, you
control when the upgrade software is implemented.
Procedure
To switch to the new software:
1. Go to the Control menu, and select Select Software Release.
Main Menu
→
Control
→
Select Software Release
The currently loaded software version and the new release that was just
transferred are shown.
If the download failed,
Invalid
appears in the Alternate Release field
instead of the new release number. Repeat the procedure
Upgrading System
Software
if this occurs.
2. Select Sw
itch&Reset.
3. Enter Y
es to the
Are you sure?
prompt. The unit resets and begins
installing the newly transferred software.
4. Verify that the new software release was successfully installed as the Current
Software Revision.
Main Menu
→
Status
→
Identity
NOTE:
If someone opens a Telnet session and accesses the unit’s Identity screen
while the unit is downloading software, the
In Progress...
message
appears in the Alternate Software Revision field.
See
Displaying System Information
on page 7-3 to see what is included on the
unit’s Identity screen.