Router User's Guide
Table Of Contents
- Contents
- About This Guide
- 1. About the FrameSaver SLV
- 2. User Interface and Basic Operation
- 3. Configuration Procedures
- 4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
- Setting Up Auto-Configuration
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
- 5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
- Dynamic Host Configuration Protocol Server
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
- 6. Security and Logins
- 7. Operation and Maintenance
- 8. Troubleshooting
- 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- 10. Setting Up NetScout Manager Plus for FrameSaver Devices
- 11. Setting Up Network Health for FrameSaver Devices
- A. Menu Hierarchy
- B. SNMP MIBs and Traps, and RMON Alarm Defaults
- C. Router CLI Commands, Codes, and Designations
- D. Router Command Line Summaries and Shortcuts
- E. Connectors, Cables, and Pin Assignments
- F. Technical Specifications
- G. Equipment List
- Index
9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
9-4
September 2002 9128-A2-GB20-80
Ordering SLM Feature Set Activations
When advanced SLM functionality is needed at a site, an Activation Certificate
(Feature No.9126-C1-220 or 9128-C1-220) can be ordered, which will allow you to
activate SLM features in FrameSaver devices with the diagnostic feature set. You
must have the OpenLane SLM system, Release 5.3 or later, to activate SLM
capability in FrameSaver devices and to manage your certificates.
NOTE:
If you have a combination of models in your network, a separate Activation
Certificate must be ordered for each model number. Each certificate can be
ordered for a single unit or for many units.
Contact one of the following to request an Activation Certificate:
If you are an end user and managing your own network, contact your sales
representative or distributor.
If your network service provider (NSP) manages the network, contact the
service provider.
If you are a network service provider or distributor, contact Paradyne at
1-800-727-2396,
www.paradyne.com
, via a purchase order, or your
Electronic Data Interchange (EDI). If submitting a purchase order by fax, send
it to 1-727-532-5270.
An Activation Certificate can also be ordered through the Paradyne store at
www.paradyne.com/store
.
Provide the following information:
Model (9126 or 9128)
Number of units to be activated
Your OpenLane SLM system license key number
To Find Your License Key Number
Your license key number was entered into your system when your OpenLane SLM
system was installed and is available from the OpenLane Administration screen.
However, to access the screen with your license key number, you must log in as a
user with Administrative system access.
Procedure
To find your OpenLane license key number:
1. Open the OpenLane SLM application and log in as a user with Administrative
access (e.g.,
ADMIN
).
2. A bottom of the OpenLane Administration screen, select
About OpenLane
SLM
.
The license key is shown mid-screen, below the copyright and build
information.