Router User's Guide
Table Of Contents
- Contents
- About This Guide
- 1. About the FrameSaver SLV
- 2. User Interface and Basic Operation
- 3. Configuration Procedures
- 4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
- Setting Up Auto-Configuration
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
- 5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
- Dynamic Host Configuration Protocol Server
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
- 6. Security and Logins
- 7. Operation and Maintenance
- 8. Troubleshooting
- 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- 10. Setting Up NetScout Manager Plus for FrameSaver Devices
- 11. Setting Up Network Health for FrameSaver Devices
- A. Menu Hierarchy
- B. SNMP MIBs and Traps, and RMON Alarm Defaults
- C. Router CLI Commands, Codes, and Designations
- D. Router Command Line Summaries and Shortcuts
- E. Connectors, Cables, and Pin Assignments
- F. Technical Specifications
- G. Equipment List
- Index
B. SNMP MIBs and Traps, and RMON Alarm Defaults
9128-A2-GB20-80 September 2002
B-7
RMON Logical Layer
RMON Frame
Relay Logical
Interfaces
These values are
calculated.
For the DTE:
(ifIndex –1) * 2 +17
For the DCE: DTE
calculated value +1
IN – RMON (IN);
[
ifName of the interface
]
17–48
OUT – RMON (OUT);
[
ifName of the interface
]
RMON Virtual
Interfaces
These values are
calculated based on
the probe’s internal
circuit index: circuit
index +65.
ALL – VIRTUAL PVC [
interface
number
] [
DLCI number
] ALL
65–512
RMON Virtual
Logical
Interfaces
These values are
calculated.
For the DTE:
(virtual interface
ifIndex –65) * 2
+513
For the DCE:
DTE calculated
value +1
IN – VIRTUAL PVC [
interface
number
] [
DLCI number
] DTE
513–1023
OUT – VIRTUAL PVC [
interface
number
] [
DLCI number
] DCE
Table B-2. NetScout Interface Objects Information (2 of 2)
ifName Description ifDescr (ifEntry 2) ifIndex