Router User's Guide
Table Of Contents
- Contents
- About This Guide
- 1. About the FrameSaver SLV
- 2. User Interface and Basic Operation
- 3. Configuration Procedures
- 4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
- Setting Up Auto-Configuration
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
- 5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
- Dynamic Host Configuration Protocol Server
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
- 6. Security and Logins
- 7. Operation and Maintenance
- 8. Troubleshooting
- 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- 10. Setting Up NetScout Manager Plus for FrameSaver Devices
- 11. Setting Up Network Health for FrameSaver Devices
- A. Menu Hierarchy
- B. SNMP MIBs and Traps, and RMON Alarm Defaults
- C. Router CLI Commands, Codes, and Designations
- D. Router Command Line Summaries and Shortcuts
- E. Connectors, Cables, and Pin Assignments
- F. Technical Specifications
- G. Equipment List
- Index
E. Connectors, Cables, and Pin Assignments
E-4
September 2002 9128-A2-GB20-80
COM Port Connector
The type of COM port connector depends on the model.
COM Port for 9126 and 9128-II (25-Position)
The following table provides the pin assignments for the FrameSaver SLV 9126
and 9128-II units’ 25-position EIA-232C communication port connector.
COM Port for 9126-II (9-Position)
The following table provides the pin assignments for the 1-slot FrameSaver
SLV 9126-II’s 9-position EIA-232C communication port connector.
Signal Direction Pin #
Shield (GND) — 1
DCE Transmit Data (TXD) From DTE (In) 2
DCE Receive Data (RXD) To DTE (Out) 3
DCE Request to Send (RTS) From DTE (In) 4
DCE Clear to Send (CTS) To DTE (Out) 5*
DCE Data Set Ready (DSR) From DTE (In) 6*
Signal Ground (SG) — 7
DCE Carrier Detect (CD) To DTE (Out) 8*
DCE Data Terminal Ready (DTR) From DTE (In) 20
* Pins 5, 6, and 8 are tied together.
Pin # Signal Direction
1* Data Carrier Detect (DCD) To DTE (Out)
2 Receive Data (RD) To DTE (Out)
3 Transmit Data (TD) From DTE (In)
4 Data Terminal Ready (DTR) From DTE (In)
5 Signal Ground (GND) —
6* Data Set Ready (DSR) To DTE (Out)
7 Not used —
8* Clear To Send (CTS) To DTE (Out)
9 Not used —
*Pins 1, 6, and 8 are tied together.