Router User's Guide
Table Of Contents
- Contents
- About This Guide
- 1. About the FrameSaver SLV
- 2. User Interface and Basic Operation
- 3. Configuration Procedures
- 4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
- Setting Up Auto-Configuration
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
- 5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
- Dynamic Host Configuration Protocol Server
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
- 6. Security and Logins
- 7. Operation and Maintenance
- 8. Troubleshooting
- 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- 10. Setting Up NetScout Manager Plus for FrameSaver Devices
- 11. Setting Up Network Health for FrameSaver Devices
- A. Menu Hierarchy
- B. SNMP MIBs and Traps, and RMON Alarm Defaults
- C. Router CLI Commands, Codes, and Designations
- D. Router Command Line Summaries and Shortcuts
- E. Connectors, Cables, and Pin Assignments
- F. Technical Specifications
- G. Equipment List
- Index
9128-A2-GB20-80 September 2002
4-1
4
Configuration Options
This chapter includes the following:
Using the Easy Install Feature
on page 4-3
Using RIP with FrameSaver SLV CSU/DSUs
on page 4-4
Entering System Information and Setting the System Clock
on page 4-5
Setting Up the Modem
on page 4-6
—
Setting Up Call Directories for Trap Dial-Out
—
Setting Up to Use the Modem PassThru Feature
Setting Up Auto-Configuration
on page 4-8
—
Selecting a Frame Relay Discovery Mode
—
Automatically Removing a Circuit
Setting Up Dial Backup
on page 4-12
—
Setting Up the DBM Physical Interface
—
Setting Up Automatic Backup Configuration
—
Modifying ISDN Link Profiles
—
Restricting Automatic Backup and Configuring Backup Timers
—
Configuring the DBM Interface to Send SNMP Traps
—
Assigning DLCIs to a Backup Group
PVC Backup Over the Network Interface
on page 4-19
Setting Up Back-to-Back Operation
on page 4-19
—
Changing Operating Mode
Configuration Option Tables
on page 4-20
Configuring the Overall System
on page 4-21
—
Configuring Frame Relay and LMI for the System (CSU/DSUs)
—
Configuring Class of Service Definitions
—
Configuring Service Level Verification Options