Manual
Table Of Contents
- Contents
- About This Guide
- 1. About the FrameSaver SLV
- 2. User Interface and Basic Operation
- 3. Configuration Procedures
- 4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
- Setting Up Auto-Configuration
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
- 5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
- Dynamic Host Configuration Protocol Server
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
- 6. Security and Logins
- 7. Operation and Maintenance
- 8. Troubleshooting
- 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- 10. Setting Up NetScout Manager Plus for FrameSaver Devices
- 11. Setting Up Network Health for FrameSaver Devices
- A. Menu Hierarchy
- B. SNMP MIBs and Traps, and RMON Alarm Defaults
- C. Router CLI Commands, Codes, and Designations
- D. Router Command Line Summaries and Shortcuts
- E. Connectors, Cables, and Pin Assignments
- F. Technical Specifications
- G. Equipment List
- Index
About This Guide
xii
September 2002 9128-A2-GB20-80
A master glossary of terms and acronyms used in Paradyne documents is
available on the World Wide Web at
www.paradyne.com
. Select
Library
→
Technical Manuals
→
Technical Glossary
.
Chapter 9,
Setting Up OpenLane
for FrameSaver Devices and
Activating SLM Features
Identifies where installation and setup information is
located and how FrameSaver units are supported.
Chapter 10,
Setting Up NetScout
Manager Plus for FrameSaver
Devices
Describes setup of the NetScout Manager Plus
application so it supports FrameSaver units, and so
you can change alarm and history file defaults.
Chapter 11,
Setting Up Network
Health for FrameSaver Devices
Describes setup of Concord’s Network Health
application so reports can be created for FrameSaver
units, and identifies those reports that apply to
FrameSaver units.
Appendix A,
Menu Hierarchy
Contains a graphical representation of how the user
interface screens are organized.
Appendix B,
SNMP MIBs and
Traps, and RMON Alarm Defaults
Identifies the MIBs supported and how they can be
downloaded, describes the unit’s compliance with
SNMP format standards and with its special
operational trap features, and describes the
RMON-specific user history groups, and alarm and
event defaults.
Appendix C,
Router CLI
Commands, Codes, and
Designations
Describes the configuration options available for the
router, and the minimum access level for each
command.
Appendix D,
Router Command
Line Summaries and Shortcuts
Provides a summary of router CLI commands,
showing syntax and defaults.
Appendix E,
Connectors, Cables,
and Pin Assignments
Shows the rear panel, tells what cables are needed,
and provides pin assignments for interfaces and
cables.
Appendix F,
Technical
Specifications
Technical Specifications.
Appendix G,
Equipment List
Equipment List.
Index
Lists key terms, acronyms, concepts, and sections.
Section Description