Manual
Table Of Contents
- Contents
- About This Guide
- 1. About the FrameSaver SLV
- 2. User Interface and Basic Operation
- 3. Configuration Procedures
- 4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
- Setting Up Auto-Configuration
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
- 5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
- Dynamic Host Configuration Protocol Server
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
- 6. Security and Logins
- 7. Operation and Maintenance
- 8. Troubleshooting
- 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- 10. Setting Up NetScout Manager Plus for FrameSaver Devices
- 11. Setting Up Network Health for FrameSaver Devices
- A. Menu Hierarchy
- B. SNMP MIBs and Traps, and RMON Alarm Defaults
- C. Router CLI Commands, Codes, and Designations
- D. Router Command Line Summaries and Shortcuts
- E. Connectors, Cables, and Pin Assignments
- F. Technical Specifications
- G. Equipment List
- Index
9128-A2-GB20-80 September 2002
8-1
8
Troubleshooting
This chapter includes the following:
Problem Indicators
on page 8-2
Resetting the Unit and Restoring Communication
on page 8-3
—
Resetting the Unit from the Control Menu
—
Resetting the Unit By Cycling the Power
—
Restoring Communication with an Improperly Configured Unit
Troubleshooting Management Link Feature
on page 8-5
LMI Packet Capture Utility Feature
on page 8-5
—
Viewing Captured Packets from the Menu-Driven User Interface
Alarms
on page 8-7
Viewing the Trap Event Log
on page 8-14
Troubleshooting Tables
on page 8-14
—
Device Problems
—
Frame Relay PVC Problems
—
ISDN DBM Problems
Tests Available
on page 8-18
—
Test Timeout Feature
—
DBM Tests
Starting and Stopping a Test
on page 8-20
—
Aborting All Tests
PVC Tests
on page 8-22
—
PVC Loopback
—
Send Pattern
—
Monitor Pattern
—
Connectivity
—
Test Ca ll