Manual
Table Of Contents
- Contents
- About This Guide
- 1. About the FrameSaver SLV
- 2. User Interface and Basic Operation
- 3. Configuration Procedures
- 4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
- Setting Up Auto-Configuration
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
- 5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
- Dynamic Host Configuration Protocol Server
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
- 6. Security and Logins
- 7. Operation and Maintenance
- 8. Troubleshooting
- 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- 10. Setting Up NetScout Manager Plus for FrameSaver Devices
- 11. Setting Up Network Health for FrameSaver Devices
- A. Menu Hierarchy
- B. SNMP MIBs and Traps, and RMON Alarm Defaults
- C. Router CLI Commands, Codes, and Designations
- D. Router Command Line Summaries and Shortcuts
- E. Connectors, Cables, and Pin Assignments
- F. Technical Specifications
- G. Equipment List
- Index
9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
9128-A2-GB20-80 September 2002
9-7
Entering an Activation Certificate
Once you receive an Activation Certificate, enter the Activation Certificate number
into your OpenLane SLM system’s database.
Procedure
To enter the Activation Certificate number:
1. Open the OpenLane SLM application and provide your access level, which
must be
Admin
.
2. Select
Firmware/Feature Maintenance
from the OpenLane
Administration screen.
3. In the Feature Activations area, select
View/Add activation
certificates,
located near the bottom of the Firmware/Feature
Maintenance menu.
4. If no Activation Certificates have been entered into the system, or if adding
another certificate:
— Click inside the New certificate box under
Add certificate
.
— Enter the Activation Certificate number from the certificate.
— Click on the prompt below it. The frame at the bottom of the screen is
refreshed to display information about the new certificate.
See the OpenLane SLM system’s online Help for additional information.
Checking Activation Certificate Status
You can view the status of certificates and activations at any time by selecting
View/Add activation certificates
from the Firmware/Feature
Maintenance menu, and clicking on the prompt below
Display certificates
.
See the OpenLane SLM system’s online Help for additional information.