Manual
Table Of Contents
- Contents
- About This Guide
- 1. About the FrameSaver SLV
- 2. User Interface and Basic Operation
- 3. Configuration Procedures
- 4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
- Setting Up Auto-Configuration
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
- 5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
- Dynamic Host Configuration Protocol Server
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
- 6. Security and Logins
- 7. Operation and Maintenance
- 8. Troubleshooting
- 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- 10. Setting Up NetScout Manager Plus for FrameSaver Devices
- 11. Setting Up Network Health for FrameSaver Devices
- A. Menu Hierarchy
- B. SNMP MIBs and Traps, and RMON Alarm Defaults
- C. Router CLI Commands, Codes, and Designations
- D. Router Command Line Summaries and Shortcuts
- E. Connectors, Cables, and Pin Assignments
- F. Technical Specifications
- G. Equipment List
- Index
B. SNMP MIBs and Traps, and RMON Alarm Defaults
B-14
September 2002 9128-A2-GB20-80
enterpriseMissedSLV-
Down(16)
devFrExtDlciIfIndex
(devFrExt.mib)
devFrExtDlciDlci
(devFrExt.mib)
devFrExtDlciMissed-
SLVs (devFrExt.mib)
devLastTrapString
(devHealthAndStatus.-
mib.)
Received SLV communications
have been missed; SLV Timeout
Error Event Threshold has been
exceeded.
String:
‘SLV down on $ifString due to
excessive SLV packet loss. Total
SLV packets lost is $numLost.’
enterpriseMissedSLV-
Up(116)
SLV Timeout Error Event has
been cleared.
String:
‘SLV up on $ifString because SLV
communication was
reestablished. Total SLV packets
lost is $numLost.’
enterprisePath-
Down(19)
ifIndex (RFC 1573)
devLastTrapString
(devHealthAndStatus.-
mib
A path on the network interface
has become unavailable.
String:
‘Path
xxx.xxx.xxx.xxx
Down, DLCI
nnnn
’
enterprisePathUp(20)
ifIndex (RFC 1573)
devLastTrapString
(devHealthAndStatus.-
mib
A path on the network interface
has become available.
String:
‘Path
xxx.xxx.xxx.xxx
Up,
DLCI
nnnn
’
enterprisePrimary-
ClockFail(1)
devLastTrapString
(devHealthAndStatus.-
mib)
Operating software has detected
that the primary clock source has
failed.
String:
‘Primary clock failed.’
enterprisePrimary-
ClockFailClear(101)
Operating software has detected
that the primary clock source is
operational again.
String:
‘Primary clock restored.’
enterpriseRMON-
ResetToDefault(13)
devLastTrapString
(devHealthAndStatus.-
mib)
All RMON-related option changes
have been reset to their default
values.
Default Factory Configuration
settings have been reloaded,
returning RMON-related options
to their original settings.
String:
‘RMON database reset to
defaults.’
Table B-7. enterprise-Specific Traps and Variable-Bindings (2 of 3)
Trap Variable-Bindings Possible Cause