Manual
Table Of Contents
- Contents
- About This Guide
- 1. About the FrameSaver SLV
- 2. User Interface and Basic Operation
- 3. Configuration Procedures
- 4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
- Setting Up Auto-Configuration
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
- 5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
- Dynamic Host Configuration Protocol Server
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
- 6. Security and Logins
- 7. Operation and Maintenance
- 8. Troubleshooting
- 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- 10. Setting Up NetScout Manager Plus for FrameSaver Devices
- 11. Setting Up Network Health for FrameSaver Devices
- A. Menu Hierarchy
- B. SNMP MIBs and Traps, and RMON Alarm Defaults
- C. Router CLI Commands, Codes, and Designations
- D. Router Command Line Summaries and Shortcuts
- E. Connectors, Cables, and Pin Assignments
- F. Technical Specifications
- G. Equipment List
- Index
D. Router Command Line Summaries and Shortcuts
D-2
September 2002 9128-A2-GB20-80
Show Command Summary
Table D-1, Show Commands, lists all of the show, or display, commands for the
CLI.
Table D-1. Show Commands
Command Function
s
how
a
rp Displays all the devices in the router’s ARP
table.
s
how
b
ridge Displays the router’s bridge forwarding
database entries.
s
how
c
onfiguration Displays the router’s current configuration.
s
how
c
onfiguration {
s
aved
|
u
nsaved} Shows the current configuration, either saved in
memory or entered during the current session.
s
how
f
rame-relay
m
ap Shows the status of all frame relay DLCIs on
the router’s frame relay interface.
s
how
in
terface
[
intf-type intf-num
[
.sub-intf-num
] ]
Shows the status of the specified interface,
sub-interface, or all interfaces and
sub-interfaces for the router.
s
how
ip
d
hcp
b
inding [
ip-address
] Shows the address bindings associated with
the DHCP server.
If an IP address is specified, only bindings
for that client will be displayed.
If no IP address is specified, all DHCP
server bindings are displayed.
s
how
ip
n
at
t
ranslations Displays all the address bindings associated
with the DHCP server.
s
how
ip
r
oute [
ip-address
] Shows the Routing Table entry for the device
with the specified IP address, or all Routing
Table entries if no IP address is specified.
s
how
ip
t
raffic Shows IP statistics for the router.
s
how
s
panning-tree Displays the router’s spanning-tree topology.