User's Manual
Table Of Contents
- Contents
- About This Guide
- 1. About the FrameSaver SLV
- 2. User Interface and Basic Operation
- 3. Configuration Procedures
- 4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
- Setting Up Auto-Configuration
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
- 5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
- Dynamic Host Configuration Protocol Server
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
- 6. Security and Logins
- 7. Operation and Maintenance
- 8. Troubleshooting
- 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- 10. Setting Up NetScout Manager Plus for FrameSaver Devices
- 11. Setting Up Network Health for FrameSaver Devices
- A. Menu Hierarchy
- B. SNMP MIBs and Traps, and RMON Alarm Defaults
- C. Router CLI Commands, Codes, and Designations
- D. Router Command Line Summaries and Shortcuts
- E. Connectors, Cables, and Pin Assignments
- F. Technical Specifications
- G. Equipment List
- Index
4. Configuration Options
9128-A2-GB20-80 September 2002
4-59
Assigning a Synchronous Data Port to Network or DSX-1 Time Slots
For a FrameSaver SLV 9128-II, which has two data ports, another assignment
screen is available. Use the Sync Data Port Assignment screen to view the status
of:
All DS0 assignments on the Network interface
All DS0 assignments on the DSX-1 interface
Then, you can a assign synchronous data port to:
Network interface time slots
DSX-1 interface time slots
Synchronous Data Port Assignment Screen Example
Value Meaning
Assign To Specifies either Net1 (network) or DSX1-1 (DSX-1) time slots.
N
tt
D
tt
This field represents time slot
tt
of the network interface.
This field represents time slot
tt
of the DSX-1 interface.
Assigned The time slot is already assigned to a network or DSX-1 time slot.
Assigned time slots cannot be modified from this screen.
Available The time slot is currently unassigned.
Port-2 For a FrameSaver SLV 9128-II, synchronous data Port-2 is assigned
to the time slot.
main/config/tslot_assign/sync_data/net 9128-II
Device Name: Node A 5/26/2000 23:32
SYNC DATA PORT ASSIGNMENT
Assign To: Net1
N01 N02 N03 N04 N05 N06 N07 N08
Assigned Assigned Assigned Assigned Assigned Port-2
Port-1 Assigned
N09 N10 N11 N12 N13 N14 N15 N16
Assigned Assigned Assigned Assigned Assigned Port-2
Port-1 Available
N17 N18 N19 N20 N21 N22 N23 N24
Available
Available Available Available Available Available Available Available
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
S
ave ClearAll DSXAssign FrAssign