User's Manual
Table Of Contents
- Contents
- About This Guide
- 1. About the FrameSaver SLV
- 2. User Interface and Basic Operation
- 3. Configuration Procedures
- 4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
- Setting Up Auto-Configuration
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
- 5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
- Dynamic Host Configuration Protocol Server
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
- 6. Security and Logins
- 7. Operation and Maintenance
- 8. Troubleshooting
- 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- 10. Setting Up NetScout Manager Plus for FrameSaver Devices
- 11. Setting Up Network Health for FrameSaver Devices
- A. Menu Hierarchy
- B. SNMP MIBs and Traps, and RMON Alarm Defaults
- C. Router CLI Commands, Codes, and Designations
- D. Router Command Line Summaries and Shortcuts
- E. Connectors, Cables, and Pin Assignments
- F. Technical Specifications
- G. Equipment List
- Index
7. Operation and Maintenance
9128-A2-GB20-80 September 2002
7-27
Test Status Messages
These test messages appear in the right column of the System and Test Status
screen. You have the option of allowing the test to continue or aborting the test.
See
Chapter 8, Troubleshooting,
for more information on tests, including how to
start and stop them.
Table 7-9. Test Status Messages (1 of 2)
Message What It Indicates
DCLB Active,
frame_relay_link
1
or
DCLB Active, Port-2
A Data Channel V.54 Loopback (DCLB) is active on
the specified frame relay link, or Port-2.
DTE External LB Active, Port-
n
An external DTE Loopback is active on the user
data port.
DTE Init. Ext LB Active, Port-
n
An external DTE Loopback is active on the user
data port.
DTPLB Active, Port-
n
A Data Terminal Payload Loopback (DTPLB) is
active on the user data port.
Lamp Test Active The Lamp Test is active, causing the LEDs on the
faceplate to flash on and off.
LLB Active,
Interface
2
A network Line Loopback (LLB) is active on the
specified network, DSX-1, or ISDN PRI interface.
No Test Active No tests are currently running.
PLB Active,
Interface
2
A Payload Loopback (PLB) is active on the
specified network, DSX-1, or ISDN PRI interface.
PVC Loopback Active, DLCI
nnnn
,
frame_relay_link
1,3
A PVC Loopback is active on the specified DLCI for
the frame relay link.
RLB Active,
Interface
2
A network Repeater Loopback (RLB) is active on
the specified network or DSX-1 interface.
Send
Pttn
Active,
Interface
2
A Send Pattern test is active on the specified
interface.
This test cannot be activated on user data ports that
have Port Use set to Frame Relay.
1
frame relay link
is one of the following:
– Net1-FR1. The frame relay link specified for the network interface, Network 1.
– Port-
n
for a 1-slot unit, or S
s
Port-
n
for a NAM in a multislot housing (the frame relay
link associated with the specified user data port in the specified slot).
–
ISDN Link Name
on a non-network ISDN DBM interface.
2
Interface
is one of the following:
– Network 1
– DSX-1
– Port-
n
– ISDN, BRI or PRI
3
nnnn
indicates a DLCI number of 16 through 1007.