User's Manual
Table Of Contents
- Contents
- About This Guide
- 1. About the FrameSaver SLV
- 2. User Interface and Basic Operation
- 3. Configuration Procedures
- 4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
- Setting Up Auto-Configuration
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
- 5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
- Dynamic Host Configuration Protocol Server
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
- 6. Security and Logins
- 7. Operation and Maintenance
- 8. Troubleshooting
- 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- 10. Setting Up NetScout Manager Plus for FrameSaver Devices
- 11. Setting Up Network Health for FrameSaver Devices
- A. Menu Hierarchy
- B. SNMP MIBs and Traps, and RMON Alarm Defaults
- C. Router CLI Commands, Codes, and Designations
- D. Router Command Line Summaries and Shortcuts
- E. Connectors, Cables, and Pin Assignments
- F. Technical Specifications
- G. Equipment List
- Index
8. Troubleshooting
8-36
September 2002 9128-A2-GB20-80
Table 8-5. Ping Options (1 of 3)
Target IP Address
Possible Settings: 000.000.000.001–126.000.000.000,
128.000.000.000–223.255.255.255
Default Setting: 000.000.000.000
Specifies the IP address to which a ping will be sent.
000.000.000.001–126.000.000.000, 128.000.000.000–223.255.255.255 – Specifies the
IP address.
Destination Interface
Possible Settings: Use_Internal_Route, Port-
n
, Net1-FR1
Default Setting: Use_Internal_Route
Specifies the routing method or destination interface for the ping.
Use_Internal_Route – When choosing which interface to send the ping, the unit first
consults its routing table. If the address or subnet does not appear in the routing table, the
ping will be sent to the Default IP Destination, if defined. (See
Configuring Node IP
Information
in Chapter 4,
Configuration Options
.)
Port-
n
, Net1-FR1 – The ping is sent out the specified destination regardless of the
internal route configuration.
DLCI
Possible Settings: 16–1007
Default Setting: [Lowest assigned DLCI on the selected interface]
Specifies the DLCI to be used for the ping.
If the DLCI is configured on a Virtual Channel Connection (VCC), the VCI and VPI are
displayed next to the DLCI.
Display Conditions
– This setting does not appear when Destination Interface is set to
Use_Internal_Route.
16–1007 – Specifies the DLCI.
EDLCI
Possible Settings: 0
Default Setting: 0
Specifies the EDLCI to be used for the ping.
Display Conditions
– This setting does not appear when Destination Interface is set to
Use_Internal_Route, and then appears only if the specified DLCI is multiplexed.
0 – Specifies the EDLCI. The field cannot be modified.