User's Manual
Table Of Contents
- Contents
- About This Guide
- 1. About the FrameSaver SLV
- 2. User Interface and Basic Operation
- 3. Configuration Procedures
- 4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
- Setting Up Auto-Configuration
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
- 5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
- Dynamic Host Configuration Protocol Server
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
- 6. Security and Logins
- 7. Operation and Maintenance
- 8. Troubleshooting
- 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- 10. Setting Up NetScout Manager Plus for FrameSaver Devices
- 11. Setting Up Network Health for FrameSaver Devices
- A. Menu Hierarchy
- B. SNMP MIBs and Traps, and RMON Alarm Defaults
- C. Router CLI Commands, Codes, and Designations
- D. Router Command Line Summaries and Shortcuts
- E. Connectors, Cables, and Pin Assignments
- F. Technical Specifications
- G. Equipment List
- Index
10. Setting Up NetScout Manager Plus for FrameSaver Devices
10-2
September 2002 9128-A2-GB20-80
Preparation
Before getting started, you need to copy some OpenLane directories to a
NetScout Manager Plus user directory. OpenLane provides these directories as a
starting point for loading new alarms and creating history files. A template of
alarms and values for configuring alarms and several templates for creating history
files specific to the FrameSaver unit are available.
OpenLane paradyne directories include the following:
Properties:
paradyne.fsd
file found in
OpenLane/netscout/alarms/directory
Properties:
paradyne.fst
file found in
OpenLane/netscout/alarms/directory
Alarms:
slvtemplate.fct
file found in
OpenLane/netscout/alarms/directory
User history:
pd*.udh
files found in
OpenLane/netscout/userHistory/directory
These files should be moved to
$NSHOME/usr
so they can be used.
See
Adding SLV Alarms Using a Template
on page 10-8 and
Creating History
Files
on page 10-13 for additional information.