User's Manual
Table Of Contents
- Contents
- About This Guide
- 1. About the FrameSaver SLV
- 2. User Interface and Basic Operation
- 3. Configuration Procedures
- 4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
- Setting Up Auto-Configuration
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
- 5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
- Dynamic Host Configuration Protocol Server
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
- 6. Security and Logins
- 7. Operation and Maintenance
- 8. Troubleshooting
- 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- 10. Setting Up NetScout Manager Plus for FrameSaver Devices
- 11. Setting Up Network Health for FrameSaver Devices
- A. Menu Hierarchy
- B. SNMP MIBs and Traps, and RMON Alarm Defaults
- C. Router CLI Commands, Codes, and Designations
- D. Router Command Line Summaries and Shortcuts
- E. Connectors, Cables, and Pin Assignments
- F. Technical Specifications
- G. Equipment List
- Index
9128-A2-GB20-80 September 2002
11-1
11
Setting Up Network Health for
FrameSaver Devices
FrameSaver units are compatible with Concord Communication’s Network Health
software. In addition, Network Health has released the first in a series of software
modules that integrate FrameSaver SLV enhanced performance statistics into its
reporting package (see the example in
FrameSaver SLV Plus At-a-Glance Report
on page 11-9). To get this report, you need Network Health R4.01 or higher.
This chapter includes Network Health information as it relates to FrameSaver SLV
devices. It includes the following:
Installation and Setup of Network Health
on page 11-2
Discovering FrameSaver Elements
on page 11-3
Configuring the Discovered Elements
on page 11-4
Grouping Elements for Reports
on page 11-5
Generating Reports for a Group
on page 11-6
—
About Service Level Reports
—
About At-a-Glance Reports
—
About Trend Reports
—
Printed Reports
Reports Applicable to SLV Devices
on page 11-7