User's Manual
Table Of Contents
- Contents
- About This Guide
- 1. About the FrameSaver SLV
- 2. User Interface and Basic Operation
- 3. Configuration Procedures
- 4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
- Setting Up Auto-Configuration
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
- 5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
- Dynamic Host Configuration Protocol Server
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
- 6. Security and Logins
- 7. Operation and Maintenance
- 8. Troubleshooting
- 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- 10. Setting Up NetScout Manager Plus for FrameSaver Devices
- 11. Setting Up Network Health for FrameSaver Devices
- A. Menu Hierarchy
- B. SNMP MIBs and Traps, and RMON Alarm Defaults
- C. Router CLI Commands, Codes, and Designations
- D. Router Command Line Summaries and Shortcuts
- E. Connectors, Cables, and Pin Assignments
- F. Technical Specifications
- G. Equipment List
- Index
F. Technical Specifications
F-8
September 2002 9128-A2-GB20-80
Table F-5. ISDN PRI DBM (Optional Feature) Technical Specifications
Specification Criteria
Standards Compliance ANSI T1.403 – 1989 (physical layer) and AT&T 62411
Bellcore SR-NWT-002120, Issue 1 – May 1992
ITU Q.921 – 1992 (link layer)
ITU Q.931 – 1993 (network layer)
TR-TSY-00860, ISDN Calling Number Identification
Services – February 1989, and Supplement –
June 1990
Power Consumption 8 mA at 120 VAC
Average power 1 watt (3.4 Btu per hour)
Weight 0.15 lbs. 2.4 oz. (0.07 kg 68 grams)
Switch Compatibility National ISDN-2 (NI-2), ATT 4ESS, or ATT 5ESS
Service Supported PRI, NI-2, ATT 4ESS custom, or ATT 5ESS custom
(supporting up to 23 B-channels), with Circuit-Switched
Data capability.
Framing Format D4, ESF
Coding Format B8ZS
Line Build-Out (LBO) 0.0 dB, –7.5 dB, –15 dB, –22.5 dB
ANSI PRM Selectable