Operation Manual

5 Diagnostics
5-26 NetPath 110 Users Manual - Installation Guide 980-001-0240B
November
2000
Protocol
Monitor
Statistics
History
The Protocol Monitor Statistics History screen displays all performance parameters for
the Frame Relay Traffic on a per-interval basis for each of the 96 possible intervals for
each protocol specified.
The first history screen is accessed by selecting ViewHistory [VH] from the Protocol
Monitor Statistics Summary screen.
The first page of the Protocol Monitor History screen is shown in Figure 5-16.
Fi
g
ure 5-16 Protocol Monitor Statistics Histor
y
DLCI [D=#orSum] - selects which portion of the statistics history will be used to
produce the History statistics.
Choices are:
Specific PVC - Enter DLCI number (#) for that PVC.
Sum of all PVCs - Enter Sum (or only S).
First Interval - Selects the interval of the indicated number (max of 96) to begin the
display of data.
Performance data is displayed as described on the Protocol Monitor Statistics Summa-
ry screen.
Additional commands on this screen are:
NextPage[+] - Advances the display to the next highest page of DLCI numbers, when
applicable.
********************* Protocol Monitor Statistics History **********************
Name: F243802 DLCI [D=#orSum]: 16
First Interval [F=#]: 2 of 96
Past
Int. Protocol RxBps TxBps Protocol RxBps TxBps
2 IP , , 0 , , 0 IPX(SNAP) , , 0 , , 0
NETBIOS(SNAP) , , 0 , , 0 SNA(SNAP) , , 0 , , 0
APPLETALK(SNAP) , , 0 , , 0 DECNET(SNAP) , , 0 , , 0
OTHER , , 0 , , 0 , , 0 , , 0
3 IP , , 0 , , 0 IPX(SNAP) , , 0 , , 0
NETBIOS(SNAP) , , 0 , , 0 SNA(SNAP) , , 0 , , 0
APPLETALK(SNAP) , , 0 , , 0 DECNET(SNAP) , , 0 , , 0
OTHER , , 0 , , 0 , , 0 , , 0
4 IP , , 0 , , 0 IPX(SNAP) , , 0 , , 0
NETBIOS(SNAP) , , 0 , , 0 SNA(SNAP) , , 0 , , 0
APPLETALK(SNAP) , , 0 , , 0 DECNET(SNAP) , , 0 , , 0
OTHER , , 0 , , 0 , , 0 , , 0
5 IP , , 0 , , 0 IPX(SNAP) , , 0 , , 0
NETBIOS(SNAP) , , 0 , , 0 SNA(SNAP) , , 0 , , 0
APPLETALK(SNAP) , , 0 , , 0 DECNET(SNAP) , , 0 , , 0
OTHER , , 0 , , 0 , , 0 , , 0
Help[?] Close[X] NextPage[+]
>